Construction Engineer Jobs in New Mexico

Job Title: Mechanical Engineer - Hukari Technical Services Company: Hukari Technical Services Location: Los Alamos, NM Description: Hukari Technical Services is looking for individuals interested in a Mechanical Engineering with pressure safety experience position.Position Description:Individual shall provide qualified personnel to perform pressure system reviews and relief device calculations. Considering the scope of work is for overall pressure system review and not pressure vessel inspections, the term “qualified” pertains to the definition found in ASME B31.3 Paragraph 340.4.2.1 Work IncludedProvide engineering analysis of various pressurized systems in FOD 6 to include the following:Perform measurements of piping length and diameters, in order to provide dimensions on relief device calculation drawings.Sketch relief device schematics using PID/PFD symbols found in the LANL standards drafting manual.Perform relief device/relief system calculations.3.0 Technical Requirements3.1 Qualifications3.1.1 Subcontractor personnel performing the calculations must be fully qualified and have actual experience and training in performing design analysis for relief device calculations in order to validate against ASME Section VIII, Division 1 Part UG-125.3.1.2 Subcontractor personnel performing the calculations must be fully qualified and have actual experience and training in performing design analysis for relief device calculations in order to validate against ASME Section VIII, Division 1 Part UG-140.3.1.3 Subcontractor personnel performing the calculations must be fully qualified and have actual experience and training in performing design analysis for relief device calculations to analyze pressure systems in accordance with ASME Code Case 2211.3.1.4 Subcontractor shall substantiate qualifications by providing proof of performance of the aforementioned calculation scenarios. Provided shall show minimum of 2 projects for which the calculations were performed within the last 2 years.3.1.5 Subcontractor shall have any of the training, education, and experience with pressure systems as defined in ASME B31.3 Paragraph 301.1 verifiable through resume, peer review, degree, class certificates, or OJT records.3.1.6 Subcontractor shall provide Engineering analysis of various pressurized systems in accordance with Conduct of Engineering per Chapter 17.Individual must have a BS degree in Mechanical EngineeringIndividual must have an active DOE 'Q' clearance

Job Title: Principal Structural Engineer Company: Volt Workforce Solutions Location: Los Alamos, NM Description: Job Description:Designs equipment and facility structures using DOE design standards and codes, including performing the following duties: Work independently to perform detailed design on projects using MathCAD, MS Office and finite element analysis software.Stay within established schedule and budget, and coordinating with other disciplines. Assigned as Lead Structural Engineer on projects you shall: Establish design criteria Manages work schedule.Coordinate multidiscipline technical aspectsMonitor scope and budgetDelegate work to other engineers on the projectAssist in the development of proposals and marketing. Review and check the work of other engineers to determine accuracy and completeness. Competency: To perform the job successfully, an individual should demonstrate the following competencies: Analytical - Synthesize complex or diverse information; Collect and research data; Use intuition and experience to complement data; Design work flows and procedures. Design - Generates creative solutions; Translate concepts and information into images;Use feedback to modify designs; Apply design principles;Demonstrate attention to detail. Problem Solving - Identifies and resolves problems in a timely manner. Gather and analyze information skillfully;Develop alternative solutions. Work well in group problem solving situations;Use reason even when dealing with emotional topics. Technical Skills - Assesses own strengths and weaknesses; Pursue training and development opportunities; Strive to continuously build knowledge and skills;Share expertise with others.Team Work - Balances team and individual responsibilities.Written Communication - Writes clearly and informatively; Edits work for spelling and grammar;Present numerical data effectively; Able to read and interpret written information. Verbal Communication – Able to clearly communicate to others at all levels within the organization. Able to report on progress to project senior management. Adaptability - Adapts to changes in the work environment.Job Requirements:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Candidate must be a US Citizen. Candidate must have a New Mexico license or is able to obtain one within 3 months. Ability to obtain a DoE Q Clearance is a plus Education/Experience: Bachelor’s degree (B. S.), Masters is a plus. 12 to 14 years related experience. Is current with building codes that has DOE experience in the design of facilities and equipment. Language Ability: Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Has the ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Math Ability: Has the ability to apply advanced mathematical concepts. Reasoning Ability: Has the ability to define problems, collect data, establish facts, and draw valid conclusions. Has the ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Office software and Internet software. In addition, experience in the following process software packages is advantageous: RISA 3D GTSTRUDLMathCAD Certificates and Licenses: Candidate is expected to have PE and be able to obtain a New Mexico license within 3 months. Supervisory Responsibilities: As a Lead Structural Engineer on projects, establishes design criteria, manages work schedule, coordinates multi-discipline technical aspects, monitor scope and budget, and delegates work to other engineers on the project. You will also assist in the development of proposals and marketing.

Job Title: Mechanical Engineer Company: Location: Holloman Air Force Base, NM Description: The Incumbent: Performs journey level professional mechanical engineering work in support of an Air Force installation. The work typically requires application of thermodynamics, mechanics, and other physical, mathematical and engineering sciences to resolve problems concerned with production, transmission, measurement, and use of energy, especially heat and mechanical power. Monitors/manages projects and evaluates and recommends programs and develops plans for engineering requirements. Mechanical systems include heating, ventilation, and air conditioning (HVAC), water and sewage (plumbing), fire suppression, control, and alarm systems, related electrical Circuitry etc. Uses computers/computer software such as information management programs, computer aided design and drafting (CADD) programs, and project tracking programs.  ADDITIONAL INFORMATION:  Salaries will be adjusted to include any applicable special salary rate or locality rate for each specific position and location.   This announcement may be used to fill one or more vacancies.   MILITARY SPOUSE PREFERENCE:  Spouses of active duty military members may be eligible for consideration under DEU competitive examining.   To claim DEU military spouse preference you must submit your documentation showing eligibility at the time you apply.  Specific program requirements may be found at  http://www.cpms.osd.mil/ASSETS/3B4E4C8C690348C09D95AF48FCE07198/st006.pdf   To request MSP hiring preference, all spouses must submit the following documents: Application or resume; Statement requesting MSP; and Copy of military sponsor's PCS orders.

Job Title: Structural Engineer with concrete exp - Hukari Technical Services Company: Hukari Technical Services Location: Hobbs, NM Description: Hukari Technical Services is looking for individuals who are interested in a Structural Engineering position.Job Requirements: Civil/Structural Engineer with strong industrial concrete experience. Experienced in code design of steel, concrete and masonry structures. Perform layout studies and comparisions.BS degree in Civil/Structural Engineering

Job Title: Project Engineer/HVAC Company: Location: Albuquerque, NM Description: HVAC/Project engineer Department: Engineering Shift: Day The Engineering Department is an active and dynamic group of professionals that supports all aspects of the manufacturing and facility maintenance efforts. The Engineering Department provides the capacity to manufacture pharmaceuticals in an efficient, timely, and safe manner, thereby contributing to the profitability of the business unit by maintaining or modifying/replacing all utility, facility, and production equipment and systems. The HVAC/facility projects engineer is an essential part of the engineering team and will possess the following skills: Project Management: Help develop and manage multiple facilities projects from conception through construction. Facilities projects can be wide ranging from simple construction to equipment specification and selection to utility evaluation and replacement. As part of leading projects to a successful completion the project engineer must be able to define, prioritize and achieve realistic, specific goals and objectives. This will involve working collaboratively with colleagues, administrative staff and managers in different departments. To do this effectively the project engineer must be able to work with a wide range of personalities including outside contractors. This will involve handling multiple priorities and dealing with deadlines under pressure. Technical Knowledge: The HVAC/facility projects engineer must provide technical support/guidance for the plant HVAC system. This includes but is not limited to understanding the facility HVAC system components, their function, how they work and dealing with the associated interdependent systems (steam, chilled water, heated water). Must have familiarity with the operation of energy management systems, HVAC systems, temperature controls, and process control systems in a manufacturing environment. Must have a minimum of 4 years? experience. Desired core competencies include: ? The ability to schedule, manage and review the work of outside engineering firms as well as outside contractors for equipment, facilities, utilities and other work, ? Prefer knowledge in design and proper operation of building management systems ? Experience in developing scope of work, facility design ? Ensure that activities stay within the budgetary guidelines ? Identify and initiate projects for facility improvements within the guidance established ? Produce/Support engineering documentation efforts ? The ability to ensure planning and tracking of all assigned projects ? Provide specifications and cost estimates for major equipment acquisitions ? Assure that facility engineering drawings and associated documentation (including work orders and ECOs) are effectively and compliantly completed, updated, and maintained. Some of the functional responsibilities of the engineering department include: Interpersonal skills to encourage effective interactions with peers, outside contractors, governing agencies Identify areas of cost effectiveness with outside contractors, Demonstrate good decision-making and judgement capabilities, with excellent attention to detail and follow through, Identify areas for cost containment. Education or Equivalent: 4 year college degree required (prefer engineering degree but not required) The position is located in Albuquerque, NM. Candidates from outside this area are welcome to apply. Please send your Word or PDF-formatted resume and salary expectations and cover letter via email to: Https://home.eease.com/recruit/?id=490813 . If you meet our criteria, we will contact you for an appointment/interview.

Job Title: Degreed Electrical or Structural Engineer, Construction Management Company: Location: Roswell, NM Description: One Contracted Project Manager (CPM) is required to provide overall construction management support as part of the contracted construction management team. Key actions will likely include: programming, building and revising contracting packages, reviewing designs, project tracking and scheduling, construction quality assurance and control, providing all day-to-day support required at the site, managing/completing construction action items, researching Air Force policies/practices, coordinating/resolving issues with installation and MAJCOM personnel, gathering data, conducting briefings, communicating with stakeholders formally and informally (verbally and in writing), overseeing other contractors, reviewing technical documents (e.g, HRMA, environmental assessments, environmental baseline surveys, financial pro formas, contracting documents), and providing logistical support for on-base meetings. The successful candidate will work collaboratively as part of the contracted construction team as well as the Air Forces team. Qualifications: - Relevant experience in the USAF Civil Engineer Squadron - Relevant Bachelors degree (preferably engineering, background in construction) - 5-years experience in a project management position(s) associated with the planning for or construction/upgrade of DoD facilities, preferably Air Force - Extensive use of Microsoft Office products (e.g., Word, Excel, PowerPoint) and e-mail communications - 5-years experience in construction management - Demonstrated use of strong written and oral communication skills with various stakeholder groups, such as military service members, base leadership, and contractors - Other desirable experience includes consulting, real estate, property management, housing, finance, DoD procurement, customer service, quality assurance/control - Must be able to obtain clearances necessary for access to military base facilities and computer systems

Job Title: Const Mechanical Engineer Company: Intel Corporation Location: Albuquerque, NM Description: Responsibilities may be quite diverse of a nonexempt technical nature. U.S. experience and education requirements will vary significantly depending on the unique needs of the job. Job assignments are usually for the summer or for short periods during breaks from school.Intern position in the Corporate Services Construction Enterprise Engineering (CEE) group in the area of Construction Project Engineering. CEE is responsible for the design and construction of Intel's facilities worldwide. Assignment will involve project scope commensurate with the following Mechanical Engineering responsibilities: - Assisting with the mechanical scope development and design of Intel facility construction projects, including semiconductor fabrication plants (Fabs) as well as office buildings, data centers and labs - Interfacing and coordinating with equipment suppliers, construction contractors and Architectural/Engineering firms to ensure the design documents accurately represent the intended scope for the project. System responsibilities include HVAC, process and cooling water, compressed air, and other - Designing shall consider constructability, adherence to Intel construction specifications, code compliance, and value engineering - Ensuring that the actual constructed installations are in compliance with the design drawings and specificationsOther Responsibilities may be quite diverse of an exempt technical nature. Experience and education requirements will vary significantly depending on the unique needs of the job. Job assignments are usually for the summer or for short periods during breaks from school.

Job Title: Structural Engineer Company: Merrick & Company Location: Los Alamos, NM Description: Structural Engineer - Los Alamos, NMIntroduction Merrick & Company is looking for a Principal Structural Engineer for our Los Alamos, NM project office. This office specializes in the design of prototype, one-off custom, or multi-manufactured equipment, specialty laboratory research equipment, vacuum systems, and custom-designed, remotely-operated mechanisms for handling radioactive and hazardous materials. About The Company Merrick & Company is a full service Engineering, Architectural, Design-Build, and Geo-Spatial Information Services, Survey and mapping company with 480 highly motivated employee owners. Headquartered in Aurora, CO since 1955, we have offices in Ottawa, ON, San Antonio, TX, Los Alamos, NM, Albuquerque, NM, Oak Ridge, TN, Atlanta and Duluth, GA. We provide engineering expertise to government agencies, industrial and commercial clients. This position will be located in Los Alamos, a small community located in the scenic high desert of Northern New Mexico. Los Alamos offers a low crime rate, access to a wealth of outdoor activities, and an excellent public school system. Job Description Designs equipment and facility structures for the Los Alamos National Laboratory using DOE design standards and codes, including performing the following duties: Work independently to perform detailed design on projects using MathCAD, MS Office and finite element analysis software. Stay within established schedule and budget, and coordinating with other disciplines. Assigned as Lead Structural Engineer on projects you shall: Establishes design criteria Manages work schedule Coordinates multidiscipline technical aspects Monitors scope and budget Delegates work to other engineers on the project Assists in the development of proposals and marketing. Reviews and checks the work of other engineers to determine accuracy and completeness. Competency: To perform the job successfully, an individual should demonstrate the following competencies: Analytical - Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures. Design - Generates creative solutions; Translates concepts and information into images; Uses feedback to modify designs; Applies design principles; Demonstrates attention to detail. Problem Solving - Identifies and resolves problems in a timely manner. Gathers and analyzes information skillfully; Develops alternative solutions. Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. Team Work - Balances team and individual responsibilities. Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Presents numerical data effectively; Able to read and interpret written information. Verbal Communication – Able to clearly communicate to others at all levels within the organization. Able to report on progress to project senior management. Adaptability - Adapts to changes in the work environment. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Candidate must be a US Citizen. Candidate must have a New Mexico license or is able to obtain one within 3 months. Ability to obtain a DoE Q Clearance is a plusEducation/Experience: Bachelor’s degree (B. S.), Masters is a plus. 12 to 14 years related experience. Is current with building codes that has DOE experience in the design of facilities and equipment. Language Ability: Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Has the ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Math Ability: Has the ability to apply advanced mathematical concepts. Reasoning Ability: Has the ability to define problems, collect data, establish facts, and draw valid conclusions. Has the ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Office software and Internet software. In addition, experience in the following process software packages is advantageous: RISA 3D GTSTRUDL MathCADCertificates and Licenses: Candidate is expected to have PE and be able to obtain a New Mexico license within 3 months. Supervisory Responsibilities: As a Lead Structural Engineer on projects, establishes design criteria, manages work schedule, coordinates multidiscipline technical aspects, monitor scope and budget, and delegates work to other engineers on the project. You will also assist in the development of proposals and marketing. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Additional information Merrick offers a competitive compensation and benefits package which includes; health insurance, dental and vision coverage, 401(k), unique work-life benefits, continuing education and training through the Merrick Learning Institute. Relocation assistance will be considered for this position. Apply on line only:  http://www.merrick.com/index.php/careercenter/search-openings No e-mail, hard copy or third party resumes accepted. Merrick is an Equal Opportunity Employer. (EOE/AA/MF/D/V)

Job Title: Project Engineer Company: Location: Albuquerque, NM Description: A well-established company with offices in Albuquerque is looking for a Project Engineer with in-depth knowledge of the design and cost of piping and mechanical projects. Areas of responsibilities will include: Verifying, tracking and providing Project Superintendents and Project Managers with accurate information regarding schedules, labor, equipment and material budgets. Providing and reviewing design communications, drawing, isometrics, and clarifications of specifications to management and field personnel and assist in project planning and execution. Using communication skills to interface with Client Project Managers, Site Manager and Superintendents, Project Managers and other departments as well as other on-site contractors to ensure efficient coordination of projects. Reading and interpreting engineering drawings and specifications; understanding engineering and design terminology. Managing/controlling all engineering construction documents thru as built issues. Handling and solving engineering constructability issues directly with the field. Interacting with Purchasing to write requisition for equipment and material. Preparing scope information documents for change order request and support project manager in the formal change order document Coordinating with field personnel to achieve project accomplishment as based on technical documents Performing additional duties as related to the position. Qualified Candidates will the following education, experience and abilities: A Mechanical Engineering degree and a minimum of three to five years of field experience in heavy industrial piping system. Manage Request for Information (RFI) Read and utilize 3D modeling programs Understand quality control issues Understand planning and scheduling techniques Read CPM schedule and evaluate scheduling issues Proficiency in MS Office Outlook, Excel and selected Engineering programs Ability to and willingness to learn, apply and teach others Strong organizational skills and adherence to project schedules Foresee problems related to structure and plans Valid driver?s license History of longevity with employer is a plus (employment history will be verified) The following is preferred and/or recommended: Obtained Mechanical Contractor License Achieved and passed Engineering in Training (EIT) Knowledge and experience with Standard manuals and HVAC manuals Experience working in Uranium Enrichment Facility environment Scheduling background specifically in Primavera Trained in Management Training Programs Documented training certificates Employment is contingent upon passing a reference check, background check and drug screen. Salary is commensurate with experience. For consideration, please send your resume to Register to View

Job Title: Electrical Engineer Company: Digital Technology Solutions Location: Albuquerque, NM Description: Performs a variety of engineering work in designing, planning and overseeing manufacture, construction, installation, operation and maintenance of electric or electronic components, equipment, systems, facilities and machinery used in generation, transmission, distribution and utilization of electrical energy for domestic, commercial and industrial consumption. May supervise staff of Engineers, Designers, and-or Technicians. Assist with Packaging OptimizationTypically would possess a degree in electrical Engineering. 5 years related experience Project Management Skills preferred. Please forward your profile to Register to View -it.com