Construction Engineer Jobs in South Carolina

Job Title: Structural Engineer - 1535 ENG/STR Company: The Shaw Group Inc. Location: Aiken, SC Description: Position Responsibilities:Structural Engineer for MOX Fuel Fabrication Facility. Responsible for performing engineering, design, and analysis of Category I steel and concrete structures, concrete anchorage of equipment and components. Perform engineering analyses and designs with general management and supervisory direction. Develop and check analyses, drawings and specifications, technical reports, and documentation of results. Understand and apply QA procedures relating to project planning, analyses, specifications and software. Immediate tasks will be field construction support as it relates to the design of embedments for concrete anchorage of equipment, structures, and components per requirements of ACI-349-01 Appendix B. Other tasks include the design of steel structures and components, cranes & monorails, and support of construction and procurement activities. Required Qualifications: Demonstrated skills and abilities required for experience level. Good planning, communication and organization skills. Understanding of regulatory requirements for engineering, analysis and design of safety-related structures, especially concrete anchorage of embedments. Excellent familiarity with ACI, AISC, ASCE 4 & 7 building design codes and standards. Working knowledge of and understanding of interfaces with other engineering disciplines desired.Bachelor Degree in Engineering discipline. Lesser experience levels will be considered depending on experience and salary requirements.Desired Qualifications:- Experience with ANSYS and/or GTSTRUDL and comparable finite element analysis programs. - Engineer with experience in detailed analysis of concrete and structural steel using applicable ACI and AISC codes.- Engineer with experience in processing field change requests in a timely manner.

Job Title: Mechanical Engineer Company: Superior Group of Companies Location: Gaffney, SC Description: Job Id: 214623 Category: Engineering Description: Superior Technical Resources Currently has a Direct Placement opportunity with our Customer located in Gaffney, SC. The duties and responsibilities are as follows:§ Researches, plans, and designs mechanical and electromechanical products and systems. § Directs and coordinates activities involved in fabrication, operation, application, installation, and repair of mechanical or electromechanical products and systems by performing the following duties: § Researches and analyzes data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. § Design products or systems such as instruments, controls, robots, engines, machines, mechanical, thermal, hydraulic, or heat transfer systems. § Plans and directs engineering personnel in fabrication of test control apparatus and equipment and development of methods and procedures for testing products or systems. § Directs and coordinates fabrication and installation activities to ensure products and systems conform to engineering design and customer specifications. § Coordinates operation, maintenance, and repair activities to obtain optimum utilization of machines and equipment. § Designs products and systems to interface machines hardware and software. § Evaluates field installation and recommends design modifications to eliminate machine or system malfunctions. § Directly supervises one employee in the Engineering Department. § Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. § Responsible for interviewing, hiring, and training employees; planning, assigning, and directing work, appraising performance, rewarding and disciplining employees, addressing complaints and resolving problems. Talent and Resources, Aligned. www.superiorjobs.com. EOE M/F/D/V

Job Title: Structural Engineer - mid level - 1275 ENG/STR Company: The Shaw Group Inc. Location: Aiken, SC Description: Position Responsibilities:Structural Engineer for MOX Fuel Fabrication Facility. Responsible for performing engineering, design, and analysis of Category I steel and concrete structures, concrete anchorage of equipment and components. Perform engineering analyses and designs with general management and supervisory direction. Develop and check analyses, drawings and specifications, technical reports, and documentation of results. Understand and apply QA procedures relating to project planning, analyses, specifications and software. Immediate tasks will be field construction support as it relates to the design of embedments for concrete anchorage of equipment, structures, and components per requirements of ACI-349-01 Appendix B. Other tasks include the design of steel structures and components, cranes & monorails, and support of construction and procurement activities.Required Qualifications:Demonstrated skills and abilities required for experience level. Good planning, communication and organization skills. Understanding of regulatory requirements for engineering, analysis and design of safety-related structures, especially concrete anchorage of embedments. Excellent familiarity with ACI, AISC, ASCE 4 & 7 building design codes and standards. Working knowledge of and understanding of interfaces with other engineering disciplines required. Desire minimum of 5+ years experience after award of Bachelor Degree in Engineering discipline. Lesser experience levels will be considered depending on experience and salary requirements. Desired Qualifications:- Experience with ANSYS and/or GTSTRUDL and comparable finite element analysis programs. - Engineer with experience in detailed analysis of concrete and structural steel using applicable ACI and AISC codes.- Engineer with experience in processing field change requests in a timely manner.

Job Title: Civil/Structural Engineers - Edgewater Technical Associates, LLC Company: Edgewater Technical Associates, LLC Location: Aiken, SC Description: Edgewater is seeking Civil Structural Engineer for an assignment in Aiken, SC. Required education and experience are as follows:DUTIES:Provide design and construction oversight of structural engineering tasks including: analysis of structural systems for both static and dynamic loads using manual computation and computer programs; design of concrete structures; design of steel, aluminum, stainless steel, timber and composite structures; foundation and anchorage design; structural analysis for impact, overpressure, and other accident conditions; preparation of CSI specifications; and review of vendor documents. Education:BS Degree in Civil Engineering or current registration as a Professional Engineer in either Civil or Structural Engineering.Experience /Skills:Candidate must demonstrate five (5) years experience in design and analysis of nuclear or industrial facilities. Candidate must demonstrate working knowledge of STAAD. Candidate must demonstrate working knowledge of National Codes and Standards such as IBC, AISC (ASD and LRFD), ACI, AWS, NFPA, and OSHA. Candidate demonstrating experience in 2D Microstation Computer Aided Drafting and Design (CADD) is preferred. Candidate must have the ability to walk down systems in the field. Area Security Access:A security clearance is not initially required; however, candidate must be capable of obtaining an L clearance if required to perform assigned duties.If you are interested in being considered for this position, are a US Citizen and your resume clearly outlines your relevant experience for this position, please e-mail it, in Word format, to: 379-37- Register to View If your qualifications match our position requirements you will be contacted and provided additional details. Edgewater will not submit your resume without first having detailed discussions with you and obtaining your permission to do so. Edgewater is an Equal Opportunity Employer and all qualified applicants will be considered for employment without regard to race, color, religion, sex or national origin.We look forward to hearing from you.

Job Title: Senior Civil Engineer Company: Location: Charleston, SC Description: Our client is adding two positions to their bridge group. For the first position, the ideal candidate will have experience working with either the NCDOT or SCDOT, extensive hydraulic design in bridges, and/or design in bridge foundations. For the second position, the ideal candidate will have extensive geotechnical experience in foundation design for bridges/culverts. Both positions will lead to manager level positions within group. forward all resumes to Register to View -llc.com

Job Title: Electrical Engineer Company: Cems Engineering, Inc Location: Ladson, SC Description: Electrical Engineer Bachelor's Degree required; EIT and 2+ years design and AutoCAD experience preferred. Good communication skills a plus. Fax resume to: Register to View This listing brought to you by The Charleston Post & Courier

Job Title: Senior Electrical Engineer 1542 ENG/ELEC Company: The Shaw Group Inc. Location: Aiken, SC Description: Position Responsibilities:Senior Electrical Engineer responsible to the Lead Electrical Engineer to perform engineering activities necessary to complete the Electrical Design for the MOX Fuel Fabrication Facility (MFFF). Electrical systems included under the engineers scope of work are 13.8kV, 4.16kV, 480 Volt, 120 Vac vital, 125Vdc, 120/240 Vac power, diesel generators, fire detection, plant lighting, heat tracing, grounding and lightning protection, communications and raceway. Must be able to prepare procurement and installation specifications for the Electrical System identified above. Must be able to interact and direct the Electrical Design Staff. Must be able to work closely with other technical disciplines. Will be required to both prepare procurement and construction specifications for electrical equipment and electrical installation as well as review sections written by colleagues. Must perform electrical analysis and calculations to verify and validate the design of the Electrical power systems (AC and DC) for the MOX facility.Required Qualifications:BS Degree in Electrical Engineering. Minimum 10 years design experience on power plant or large industrial facility projects. Field construction interface experience on large industrial facility or power plant projects. Knowledge of commercially available power system analysis software. Knowledge of the National Electric Code (NEC). Basic computer skills in Access, Word and Excel. Past experience and capability of performing medium and low voltage power system studies; transient analysis, load flow studies, fault current analysis and voltage drop calculations. Capable of supervising and reviewing work of designers and less senior engineers. Capable of writing equipment purchase specifications and performing bid analysis. Capable of performing relay/breaker setting calculations and coordination studies. Desired Qualifications:Professional Engineering License in South Carolina or ability to obtain license within 6 months. familiarity with ETAP for electrical system analysis.Familiarity with NRC regulatory guidelines for class 1E systems, IEEE -308, -384, -379 and -603.

Job Title: Civil / Structural Engineers Needed for Long Term Assignments - Benefits Available! - TFE, Inc. Company: TFE, Inc. Location: Aiken, SC Description: TFE, Inc. is in need of several Civil / Structural Engineers for long term positions. We offer great wages and full benefits!Provide design and construction oversight of structural engineering tasks support services oon assigned WSRC SRR Engineering Teams. Engineering support services include engineering analysis, design development, and generation of design output documents including but not limited to: Calculations; Site Plan; Soils Exploration; Structural Drawings including Concrete and Steel; Layout Drawings; Architectural Details; Shoring Details; Specifications; Support Details; and Vendor Document Reviews.Structural engineering tasks will include: analysis of structural systems for both static and dynamic loads using manual computation and computer programs; design of concrete structures; design of steel, aluminum, stainless steel, timber and composite structures; foundation and anchorage design; structural analysis for impact, overpressure, and other accident conditions; and preparation of CSI Sspecifications; and review of vendor documents., Engineering services will be provided using WSRC SRR processes and procedures. Programmatic guidance will be provided by WSRCSRR.REQUIRED QUALIFICATIONS:Education:BS Degree in Civil Engineering or current registration as a Professional Engineer in either Civil or Structural Engineering.Experience /Skills:Candidate must demonstrate five (5) years design experience in design and analysis of nuclear or industrial facilities. Candidate must demonstrate working knowledge preferably of GTSTRUDL (STAAD. knowledgeexperience is acceptable with willingness to learn GTSTRUDL). Candidate must demonstrate working knowledge of National Codes and Standards such as IBC, AISC (ASD and LRFD), ACI, AWS, NFPA, and OSHA. ACI and AISC code requirements. Candidate demonstrating experience in 2D Microstation Computer Aided Drafting and Design (CADD) is preferred. Candidate must have the ability to walk down systems in the field. Work Hours:A 40 hour work week is scheduled. SRS utilizes various work schedules; including 5/8s (8 hours/day; five days per week), 4/10s (10 hours/day; four days per week), and a 9/80s (9 hours/day, fives days on week A and 4 days on week B). Work week excludes WSRC SRR holidays. Each work day has a 30-minute lunch.Area Security Access:A security clearance is not initially required; however, candidate must be capable of obtaining an L or Q clearance if required to perform assigned duties.Please send resume to Register to View and indicate the position in the subject line.

Job Title: Civil Structural Engineers needed for work at SRR - RCS Corporation Company: RCS Corporation Location: Aiken, SC Description: RCS Corporation is seeking Civil Structural Engineers with DOE nuclear experience for an assignment in Aiken,SC.DUTIES:Provide design and construction oversight of structural engineering tasks on assigned Engineering Teams. Structural engineering tasks include: analysis of structural systems for both static and dynamic loads using manual computation and computer programs; design of concrete structures; design of steel, aluminum, stainless steel, timber and composite structures; foundation and anchorage design; structural analysis for impact, overpressure, and other accident conditions; preparation of CSI specifications; and review of vendor documents. REQUIRED QUALIFICATIONS:Education:BS Degree in Civil Engineering or current registration as a Professional Engineer in either Civil or Structural Engineering.Experience /Skills:Candidate must demonstrate five (5) years experience in design and analysis of nuclear or industrial facilities. Candidate must demonstrate working knowledge of STAAD. Candidate must demonstrate working knowledge of National Codes and Standards such as IBC, AISC (ASD and LRFD), ACI, AWS, NFPA, and OSHA. Candidate demonstrating experience in 2D Microstation Computer Aided Drafting and Design (CADD) is preferred. Candidate must have the ability to walk down systems in the field. EEO-Equal Employment Opportunity

Job Title: **CIVIL STRUCTURAL ENGINEER** - Value Added Solutions, Inc. Company: Value Added Solutions, Inc. Location: Aiken, SC Description: POSITION TITLE: CIVIL STRUCTURAL ENGINEERDUTIES:Provide design and construction oversight of structural engineering tasks on assigned SRR Engineering Teams. Structural engineering tasks include: analysis of structural systems for both static and dynamic loads using manual computation and computer programs; design of concrete structures; design of steel, aluminum, stainless steel, timber and composite structures; foundation and anchorage design; structural analysis for impact, overpressure, and other accident conditions; preparation of CSI specifications; and review of vendor documents. Engineering services will be provided using SRR processes and procedures. Programmatic guidance will be provided by SRR.REQUIRED QUALIFICATIONS:Education:BS Degree in Civil Engineering or current registration as a Professional Engineer in either Civil or Structural Engineering.Experience /Skills:Candidate must demonstrate five (5) years experience in design and analysis of nuclear or industrial facilities. Candidate must demonstrate working knowledge of STAAD. Candidate must demonstrate working knowledge of National Codes and Standards such as IBC, AISC (ASD and LRFD), ACI, AWS, NFPA, and OSHA. Candidate demonstrating experience in 2D Microstation Computer Aided Drafting and Design (CADD) is preferred. Candidate must have the ability to walk down systems in the field. Work Hours:A 40 hour work week is scheduled. SRS utilizes various work schedules; including 5/8s (8 hours/day; five days per week), 4/10s (10 hours/day; four days per week), and a 9/80s (9 hours/day, fives days on week A and 4 days on week B). Work week excludes SRR holidays. Each work day has a 30-minute lunch.Area Security Access:A security clearance is not initially required; however, candidate must be capable of obtaining an L clearance if required to perform assigned duties. CANDIDATE EVALUATION FORMCANDIDATE NAME: POSITION TITLE: Civil Structural EngineerMINIMUM REQUIREMENTS:(See Job Description) YES NO 1) U.S. Citizen 2) BS Degree in Civil Engineering OR If no degree, then Professional Engineering Registration in either Civil or Structural Engineering 3) Minimum of five years experience in design andanalysis of nuclear or industrial facilities. 4) Working knowledge of STAAD 5) Working knowledge of National Codes and Standards 6) Ability to walk down systems in the field _______ _______ 7) Telephone interview to validate resume data* 8) Reference check to evaluate performance capability* *Evaluation validation criteriaAdditional Qualifications of Candidate: ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________Narrative Discussion of Resume Validation**: ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________(**Discussion not required if candidate is acceptable)EVALUATOR: DATE: