Project Engineer Jobs in New Mexico

Job Title: Structural Engineer with ANSYS experience - Hukari Technical Services Company: Hukari Technical Services Location: Hobbs, NM Description: Hukari Technical Services is looking for personnel who would interested in a position at the LES facility in Hobbs NM.The sucessful applicant must be a degreed Structural Engineer with current ANSYS experience.

Job Title: Mechanical Engineer Company: Location: Holloman Air Force Base, NM Description: The Incumbent: Performs journey level professional mechanical engineering work in support of an Air Force installation. The work typically requires application of thermodynamics, mechanics, and other physical, mathematical and engineering sciences to resolve problems concerned with production, transmission, measurement, and use of energy, especially heat and mechanical power. Monitors/manages projects and evaluates and recommends programs and develops plans for engineering requirements. Mechanical systems include heating, ventilation, and air conditioning (HVAC), water and sewage (plumbing), fire suppression, control, and alarm systems, related electrical Circuitry etc. Uses computers/computer software such as information management programs, computer aided design and drafting (CADD) programs, and project tracking programs.  ADDITIONAL INFORMATION:  Salaries will be adjusted to include any applicable special salary rate or locality rate for each specific position and location.   This announcement may be used to fill one or more vacancies.   MILITARY SPOUSE PREFERENCE:  Spouses of active duty military members may be eligible for consideration under DEU competitive examining.   To claim DEU military spouse preference you must submit your documentation showing eligibility at the time you apply.  Specific program requirements may be found at  http://www.cpms.osd.mil/ASSETS/3B4E4C8C690348C09D95AF48FCE07198/st006.pdf   To request MSP hiring preference, all spouses must submit the following documents: Application or resume; Statement requesting MSP; and Copy of military sponsor's PCS orders.

Job Title: Mechanical Engineer Company: Location: Kirtland AFB, NM Description: The Incumbent: Performs journey level professional mechanical engineering work in support of an Air Force installation. The work typically requires application of thermodynamics, mechanics, and other physical, mathematical and engineering sciences to resolve problems concerned with production, transmission, measurement, and use of energy, especially heat and mechanical power. Monitors/manages projects and evaluates and recommends programs and develops plans for engineering requirements. Mechanical systems include heating, ventilation, and air conditioning (HVAC), water and sewage (plumbing), fire suppression, control, and alarm systems, related electrical Circuitry etc. Uses computers/computer software such as information management programs, computer aided design and drafting (CADD) programs, and project tracking programs.  ADDITIONAL INFORMATION:  Salaries will be adjusted to include any applicable special salary rate or locality rate for each specific position and location.   This announcement may be used to fill one or more vacancies.

Job Title: Structural Engineer with concrete exp - Hukari Technical Services Company: Hukari Technical Services Location: Hobbs, NM Description: Hukari Technical Services is looking for individuals who are interested in a Structural Engineering position.Job Requirements: Civil/Structural Engineer with strong industrial concrete experience. Experienced in code design of steel, concrete and masonry structures. Perform layout studies and comparisions.BS degree in Civil/Structural Engineering

Job Title: Mechanical Engineers - Hukari Technical Services Company: Hukari Technical Services Location: Los Alamos, NM Description: Hukari Technical Services is looking for individuals interested in a Mechanical Engineering position.Job Description:Provide engineering analysis of various pressurized systems to include the following:-perform measurements of piping length and diameter, in order to provide dimensions on relief device calculation drawings;-sketch relief device schematics using PID/PFD symbols found in the LANL standards drafting manual;-Perform relief device/relief system calculations.Job Requirements:-must have actual experience and training in performing design analysis for relief device calculations in order to validate against ASME Section VIII, Division 1 Part UG-125 and 140;-must have actual experience and training in performing design analysis for relief device calculations to analyze presssure systems in accordance with ASME Code Case 2211;-must have any of the training, education, and experience with pressure systems as defined in ASME B31.1 Paragraph 301.1.

Job Title: Mechanical Engineer I Company: General Dynamics C4 Systems Location: Las Cruces, NM Description: Education and ExperienceBS Degree in mechanical engineering or equivalent experience.Duties and TasksWorks as individual technical contributor.Performs detailed design and test of software, electrical, or mechanical components or subsystems.Designs and analyzes mechanical systems, and equipment. Conducts feasibility studies and tests new and modified designs.Prepares detailed design, design testing and prototype fabrication.Also includes activities involved in fabrication, operation, application, installation, and repair of mechanical or electromechanical products and systems.Researches and analyzes data, such as customer design proposal, specifications, and manuals to determine feasibility of design or application.Participates as active member of project team. Accepts direction from superiors. Integrates well in a team environment.Seeks out mentorship. Listens to mentor.Meets own project execution commitments.Accepts and complies with process/policy requirements.Learns and applies GD culture, policies and processes.Demonstrates initiative, applies personal talent to practical solutions.Business Impact:Works within the trade space defined (cost/schedule/technology).Demonstrates Leadership as follows:Applies knowledge effectively in team environment. Able to accept and integrate constructive feedback.InterfaceGenerally within an identified work group. Day to day direction usually from task lead or project leader. Little or no outside business contact. Initial contact with more experienced technical.personnel in mentor/mentee relationship.Knowledge, Skills & AbilitiesDemonstrates the ability to weigh risks and make progress in the face of uncertainty.Willingly takes on problems and commits to solutions.Specific Skills needed for Contract duties1 Create and maintain assembly parts lists 2 Prepare illustrations diagrams, and perspective drawings for design reviews and formal presentations 3 Assemble cable and wire harness lists 4 Collect physical interface drawings for vendors and suppliers 5 Maintain a library of AutoCad drawings for units and components6 Transfer AutoCad and SolidWorks files between LCNM and Scottsdale 7 Construct and maintain RFFA total weight and distribution tables 8 Interact with CPA on RF Frame details and dimensions 9 Construct diagrams of waveguide runs and alignment. 10 Layout test, fabrication and integration fixtures 11 Develop concepts and details for RF Frame rolling test fixture 12 Direct involvement with test fixture construction and fabrication 13 Assist in collecting unit and component thermal dissipation data 14 Contribute to the development of training material

Job Title: Mechanical Engineer - Hukari Technical Services Company: Hukari Technical Services Location: Los Alamos, NM Description: Hukari Technical Services is looking for individuals interested in a Mechanical Engineering with pressure safety experience position.Position Description:Individual shall provide qualified personnel to perform pressure system reviews and relief device calculations. Considering the scope of work is for overall pressure system review and not pressure vessel inspections, the term “qualified” pertains to the definition found in ASME B31.3 Paragraph 340.4.2.1 Work IncludedProvide engineering analysis of various pressurized systems in FOD 6 to include the following:Perform measurements of piping length and diameters, in order to provide dimensions on relief device calculation drawings.Sketch relief device schematics using PID/PFD symbols found in the LANL standards drafting manual.Perform relief device/relief system calculations.3.0 Technical Requirements3.1 Qualifications3.1.1 Subcontractor personnel performing the calculations must be fully qualified and have actual experience and training in performing design analysis for relief device calculations in order to validate against ASME Section VIII, Division 1 Part UG-125.3.1.2 Subcontractor personnel performing the calculations must be fully qualified and have actual experience and training in performing design analysis for relief device calculations in order to validate against ASME Section VIII, Division 1 Part UG-140.3.1.3 Subcontractor personnel performing the calculations must be fully qualified and have actual experience and training in performing design analysis for relief device calculations to analyze pressure systems in accordance with ASME Code Case 2211.3.1.4 Subcontractor shall substantiate qualifications by providing proof of performance of the aforementioned calculation scenarios. Provided shall show minimum of 2 projects for which the calculations were performed within the last 2 years.3.1.5 Subcontractor shall have any of the training, education, and experience with pressure systems as defined in ASME B31.3 Paragraph 301.1 verifiable through resume, peer review, degree, class certificates, or OJT records.3.1.6 Subcontractor shall provide Engineering analysis of various pressurized systems in accordance with Conduct of Engineering per Chapter 17.Individual must have a BS degree in Mechanical EngineeringIndividual must have an active DOE 'Q' clearance

Job Title: Civil Engineer Company: Location: Kirtland AFB, NM Description: GS-0810, Civil Engineer (Installation) Performs journey level professional civil engineering work in support of an Air Force installation.  Monitors/manages projects and evaluates and recommends programs and develops plans for engineering requirements.  Plans, designs, constructs, maintains airfield/vehicle pavements as well as structures/facilities that provide shelter, support transportation systems, and control natural resources.  Plans/designs work for substantial multi-phase new construction, renovation, and improvement projects.  Regularly inspects/surveys facilities, utility systems, streets and runways to identify deficiencies for incorporation into the infrastructure maintenance plan.  Prepares layouts, design considerations, and specifications.  Reviews architecture and engineer (A&E) contract and in-house designs for future construction/renovations/improvements to determine structural compatibility, maintainability, and functionality.  Performs detailed preconstruction site surveys.  Prepares or reviews as-built drawings at the end of construction.  Projects include, but are not limited to laboratories, airfield pavements, utility systems, base utility plants, aircraft maintenance shops/hangars, recreation facilities, administrative offices, and dormitories.   GS-0810, Civil Engineer (AF/FOA/MAJCOM) (Some positions may require a Professional Engineer Certification (PE)) Utilizing professional civil engineering knowledge, serves as an Air Force (AF)/Field Operating Agency (FOA)/Major Command (MAJCOM) level advisor to engineers on matters concerning planning, programming, designing, construction, maintenance, repair, upgrade, and operation for AF infrastructure facilities, utility systems, and airfield/vehicle pavements.  Serves as the program/project manager responsible for planning, directing, and coordinating activities for airfield pavements/runways as well as facilities such as large industrial buildings, multi-story office buildings, hospitals, aircraft maintenance shops/hangars, recreation facilities, dormitories, and other facilities of similar size and complexity which are typical to a military installation.  Implements and clarifies policies, criteria, and standards set by higher headquarters to ensure installations meet higher headquarter’s guidance.  Prioritizes the development of requirements and assists in development of projects/ programs that comply with AF objectives.  Recommends modification to and collaborates in development of policies, criteria, and standards. ADDITIONAL INFORMATION:  Salaries will be adjusted to include any applicable special salary rate or locality rate for each specific position and location. This announcement may be used to fill one or more vacancies.

Job Title: Mechanical Engineer Company: Location: Albuquerque, NM Description: You would perform consulting and review services involving mechanical equipment and systems problems, investigate and analyze complex mechanical designs and construction problems. Projects include both military and civil works construction, the construction programs include such mechanical systems as heating, ventilating, humidifying and air conditioning (HVAC) for a full range of building types, controls for HVAC include digital and computer based monitoring as well as a full range of fluids including cryogenics, toxic vapor sensing systems, fuel vapor recovery, etc. You would review contract plans and specifications, prepare and recommend design changes, interpret details for the installation of highly complex mechanical systems and advise project engineers on unusual installation projects.

Job Title: Civil Engineer Company: URS Location: Los Alamos, NM Description: Bachelor's degree in Civil or Structural Engineering. Minimum of 7 years experienceHave a New Mexico PE or the ability to obtain one within six months.Must have experience that includes:• Conceptual and structural design. • Engineering calculations, specifications and estimates • AutoCAD, STAAD Pro, Soft Desk• Coordination of technical and administrative tasks with other disciplinesMust be US Citizen and able to obtain Top Secret or Q Clearance Job Description : URS Corporation is a fully integrated engineering, construction and technical services organization with the capabilities to support every stage of the project life cycle. The Company offers a full range of program management; planning, design and engineering; systems engineering and technical assistance; construction and construction management; operations and maintenance; and decommissioning and closure services. We provide these services for the U.S. federal government, national governments of othercountries, state and local government agencies in the United States and internationally,FORTUNE 500 companies and other multinational corporations. URS has approximately 45,000employees in a network of offices in more than 30 countries. The Company’s business is focused on four key market sectors: Federal, Infrastructure, Power,and Industrial & Commercial.This is a mid-level engineering position for long term design project. Work will involve civil, structural design support for buildings, roads, barriers, lighting and bridges. Working under the direction of the Supervising Discipline Engineer, the candidate will perform technical civil engineering assignments within approved engineering schedules and budgets. Additional Responsibilities:• For routine problems, apply theories and principles of civil engineering to provide engineering support, project controls, procurement and estimating at project sites.• Assist in providing guidance and training to technical and engineering personnel and assure quality, quantity, and completeness of the engineering required • Plan, schedule and implement civil engineering efforts associated with assigned projects • Coordinate technical and administrative activities with employees in other disciplines and departments• Maintain proper engineering files and records. • Advise the supervising engineer as to status of assignments with respect to schedule, budgets, delays and adverse problems. URS seeks individuals who are motivated to learn, grow and seek out new project responsibilities. As one of the world's largest engineering design firms, URS offer abundant opportunities to work on world-class projects and gain valuable professional experience.URSCB016