Quality Assurance Manager Jobs in Washington

Job Title: Construction Inspector Company: Location: Kennewick, WA Description: Navarro Research and Engineering, Inc. is recruiting for a Construction Inspector in Richland, WA. There is a need for two experienced Acceptance Inspectors/Construction Engineers assigned to support ARRA funded work scope: subprojects to include equipment acceptance oversight and field verification of installation of jumpers, valve funnels, the MICRON control system, corrosion probes, ENRAF?s, radial filters, condensate line and SY transfer lines upgrades at the Hanford Tank Farms. Requirements: - Experience in construction management and field oversight as well as the Hanford Tank Farms area is an advantage. - Task includes routine performance of construction-related inspection and oversight of Washington River Protection Solutions. - Inspections focus on work in progress, special activities, identified problem areas, and adequacy of the WRPS corrective actions. This is accomplished by direct observation and involvement in QA reviews, testing, acceptance inspections and safety surveys. - Conduct periodic ARRA supplier inspections to verify supplier compliance with WRPS technical and quality requirement, and to verify adequate contractor-supplier quality oversight; perform/document inspections of in-process and completed contractor inspection activities as assigned to ensure site construction is conducted in accordance with the contract, authorization basis, and applicable codes. - Ensure corrective actions are implemented when the provisions are not met. - Support monitoring of contractor construction activities and focus on ongoing construction by direct observation and involvement in acceptance inspections, and safety surveys. Location Richland , WA APPLY ONLINE HERE: http://career-advisor.jobamatic.com/a/jbb/job-details/201696

Job Title: Quality Control Inspector Company: Location: Seattle, WA Description: Competitive and award-winning construction company accepting resumes for experienced Architectural/Structural Quality Control Inspector for large military multi-family housing project at Eielson AFB, Alaska. Salary is based on experience. Excellent benefits package. Drug Free Workplace. Equal Opportunity Employer. Qualified women, minorities, veterans, disabled & handicapped persons are encouraged to apply. Email resumes to HR Manager, Register to View Minimum Requirements: ? Degree in construction management, engineering or architecture and three (3) years field management experience in the construction industry OR five (5) years field management experience in the construction industry ? Proficiency with Microsoft Office applications ? Possess exceptional communication skills with third-party representatives (government officials or otherwise), co-workers and supervisors. ? Prior quality control experience on military construction projects preferred. ? Alaska resident preferred. Major Responsibilities: ? Review design drawings, specifications, submittals and applicable codes for construction requirements and field compliance. ? Inspect all work activities related to construction of multi-family residences with primary focus on concrete and framing activities. ? Interface with construction superintendents regarding work deficiencies. ? Provide written, detailed daily reports on construction activities, deficiencies and corrective action. ? Enforce company safety requirements.

Job Title: Quality Inspector - Aircraft Company: Adecco Engineering & Technical Location: Yakima, WA Description:  Job Title:                    Quality Inspector  Job Status:                Contract, 7 month assignment Job Location:            Yakima, WA Recruiter Contact:    Register to View  Details of the Position:  Interpret drawings, documents, process procedures and specifications required to determine part conformance. Have thorough knowledge of all the precision measuring equipment, fixtures, inspection devices, and the precision tools and processes used in manufacturing part such as height gages, micrometers, calipers, dial bore gages, comparator, coordinate machine, Rockwell and spring tester, etc.Initiate Material Control Tags on discrepant parts for preliminary review/MRB disposition.Have a working knowledge of coordinate measuring machines.Maintain and properly execute inspection records and procedures.  See that line inspection sheets and shop drawings are current by checking with the master file.Perform first part inspections of each operation and audit the shop as assigned making sample checks of operations in process to assure required quality is being maintained.Compile and maintain inspection bluebooks as required.Contact the proper personnel to correct discrepant items in planning, methods, tooling, geometric tolerance and blueprints.Coordinate and assist the work assignments of lower classified inspectors.Coordinate work with both production and inspection supervisors.Report and control non-conforming items.Pass on pertinent information to succeeding shifts.Have the ability to accomplish work assignments with minimum supervision  Apply Online About Adecco North America Adecco is a Fortune Global 500 company and the world leader in workforce solutions. Our comprehensive service offering includes temporary and contract staffing, permanent recruitment, outplacement and career services, training and consulting. Adecco is an equal opportunity employer.

Job Title: Road Maintenance/Facility Maintenance & Construction Inspectors Company: Location: Kennewick, WA Description: Road Maintenance and Construction Inspectors needed for the area of Mt. Hood National Forest & Columbia Gorge National Scenic Area in the Counties of Clark, Klickitat and Skamania. Duties consist of inspecting maintenance activities such as ditch cleaning, culvert basin cleaning, hauling of excavated material, repair of damaged culvert ends, removal of brush form culvert ends, hazard and obstruction removal within the roadway, surface maint., drainage install or replacement, vegetation maint., maint of cattle guards, and various other road, vegetation and barrier maint. Facility Maintenance and Construction Inspector needed for the area of Mt. Hood National Forest & Columbia Gorge National Scenic Area in the Counties of Clark, Kickitat and Skamania. Duties consist of inspecting facility maintenance activities an the upgrade, modification, remodeling, reconstruction of, and construction of structures and facilities. Please reply ti the above listed posting by attaching a resume. Please send qualified resumes only.

Job Title: Aerospace Quality Assurance Inspector Company: Location: Seattle, WA Description: Job Description Job Title: Inspector Department: Quality Assurance Reports To: Quality Assurance Supervisor/Manager FLSA Status: Non-exempt Summary Inspects and reports on material processes and products (both manufactured and purchased), using variable or attribute measuring instruments and techniques to ensure conformance to the applicable drawing and regulatory and company requirements. Essential Duties and Responsibilities include the following. Other duties may be assigned. · Examine records to secure such information as results of quality tests and outside processing. · Inspects product to determine compliance with engineering drawings, company's quality assurance system, and shipping and packing for conformity to specified standards. · Stamps mark of approval or rejection on product and writes report of examinations. · Examines material or product for surface defects such as cracks, pits, and incomplete assembly. Sort articles according to extent of defect. · Compares product with parts list and drawing to ensure completion of assembly. · Records factors causing goods to be returned. · Verifies specified dimensions of product or material. · Rejects defective parts and marks type of defect on part, container or parts or inspection tag. · Tests parts for hardness and conductivity. · Tests mechanisms for clearance and freedom of movement. · Performs first article inspection of parts and assemblies Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED); one or more years of related experience and/or training; or equivalent combination of education and experience. Experience in an aerospace environment preferred. Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Basic computer skills required. Ability to read blueprints/drawings preferred. Physical Demands/Work Environment The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to use hands to handle, or feel and talk or hear. The employee is frequently required to stand. The employee is occasionally required to walk; sit and reach with hands and arms. The employee must regularly lift and /or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals and outside weather conditions. The noise level in the work environment is usually moderate to loud

Job Title: Traffic Signal Inspector Company: KBA, Inc Location: Seattle, WA Description: Build Tomorrow Today!KBA, Inc. has worked on over $1 billion of some of the area’s most technically challenging and complex construction projects: Roads ? Bridges & Highways ? TransitWater & Wastewater ? Buildings ? Land Development ? Port Facilities KBA Inc. is seeking a Traffic Signal Inspector to work on a transportation improvement project. Preferred candidates will have a background specializing in traffic signal installation, interconnect, roadway illumination, and general roadway civil construction experience. We are interested in individuals seeking a career opportunity with a stable, dynamic and growing Construction Management firm.  Field Inspectors are responsible for providing daily inspection and documentation of construction work so that the construction complies with the contract documents. Successful candidates will be great communicators possessing strong interpersonal skills, computer skills, knowledge in project documentation and document management systems, and will also have the following:   ·         College degree and/or work related experience and specialized training/courses and certificates·         Strong written and oral communication skills·          Must know electrical code compliance·         Familiarity with City and State Electrical codes ·         Experienced in traffic signal installation, interconnect, roadway illumination, and general roadway civil construction·         Experience with computer applications such as Microsoft Excel and Word is strongly preferred·         IMSA certification or similar certification desired·         A valid driver's license and maintenance of a good driving record is required·         Extensive background in construction, multiple areas a plus (i.e. roads, bridges, highways, transit, water & wastewater, stormwater, pipelines, buildings, land development, port facilities, etc.)    KBA fosters a culture that values people, relationships and community.  KBA offers competitive salaries, DOE; an excellent benefit package that includes health insurance, 401K / ESOP Plan, holidays, paid time off (PTO) and more. KBA encourages professional growth and supports employees in enhancing their strengths. If your background and experience meet these qualifications and you are interested in joining our team, e-mail your resume and a cover letter stating your interest.  KBA is an Equal Opportunity Employer and is committed to creating a work environment that is free of discrimination and unlawful harassment and full of opportunity for all with a workforce that reflects the region’s diversity.

Job Title: Quality Assurance Inspector Company: Location: Yakima, WA Description: Amtech, LLC. is recognized as one of the fastest growing, and most innovative, small businesses in the State of Washington. Amtech is a diverse manufacturer of composite-based products and parts. With expertise in Design, Engineering, and Research and Development, Amtech s products are distributed in both military and commercial markets. Established in 1987, Amtech employs a growing workforce of skilled technicians, working in a specialized plant in Wapato, WA. We are currently seeking a Quality Assurance Inspector for our Swing Shift to join our team. POSITION SUMMARY Inspection of manufactured product to ensure conformance to Customer and Amtech quality requirements which includes all fiberglass and plastic parts at in-process and final inspection. ESSENTIAL FUNCTIONS / RESPONSIBILITIES Inspect all parts. Perform product inspection to ensure conformance to drawings and specifications. Use in process and final check list for inspection and recommend revisions and changes for product quality improvement. Documentation: Record quality data including manufacturing defects, checklist reject tags, NCR data (Non-Conformance Reports) and other documentation as required. Perform Final Inspection. Reviews work orders, checklists and other documents at final inspection to verify completeness and accuracy, includes stamping documents and placing acceptance inspection stickers on product. Determines product acceptance and authorizes product shipments to Amtech s customers. Work with and help tutor manufacturing personnel on the correct method of manufacturing and inspection of product to meet customer acceptance requirements. Provide input to Manufacturing and Tooling departments when customer rejects occur and aid in the resolution process as required. Perform all duties in a safe manner. Follow all safety procedures and wear personal protective equipment as required at all times. Perform Material Testing per applicable Work Instructions. Using calibrated test equipment verify resin, catalyst and gel coat properties. Document and identify acceptance results. Participate in Quality Management System (ISO) activities as required. All other duties as assigned. EDUCATION AND EXPERIENCE Ability to perform dimensional and visual inspections. Ability to read engineering drawings and blueprints. Working knowledge of Geometric Dimensioning and Tolerancing. Ability to use inspection hand tools. Ability to made decisions related to accept and reject criteria affecting customer products JOB KNOWLEDGE, SKILLS AND ABILITIES Right to Know MSDS On the Job Training for position plus the following: Understanding and following SOPs as related to job functions Understanding and following Work Orders Understanding and following Safety Procedures Housekeeping Handling and Maintenance of Tools Awareness of Quality policies and location of quality manuals. Basic understanding of ISO standards Skills Desired: Previous QA in manufacturing environment desired Attention to detail Willing to work Swing shift 1:30pm-10:00pm PHYSICAL DEMANDS Ability to lift up to 60 lbs. Repetitive wrist/arm motion for extended periods of time. Good eyesight required to see fine detail work. Standing on a cement floor for the majority of the shift. WORKING CONDITIONS AND ENVIRONMENT Heated, non-air-conditioned production environment with exposure to noises, dust and chemicals. Building is one-story with uneven flooring. Performs work in awkward positions. Work involves the use of chemicals. We are an Equal Opportunity Employer & Drug-Free Workplace. Pre-Employment drug testing is required. Must be able to provide documentation of legal authorization to work in the United States upon hire. We offer paid Vacation,& Holidays. Competative Wages & Benefit package. (Medical/Dental/Life/LTD Insurance & 401k) ** Please include your Salry Requirements along with your Resume or Application submission. Experience & Qualifications will be taken into consideration. **

Job Title: CONSTRUCTION INSPECTOR, ASSISTANT Company: Location: Tacoma, WA Description: Under the direction of the Construction Inspection Supervisor, assist in performing a variety of routine inspection duties related to construction and installation projects, including assisting in project inspections, testing construction materials and coordinating billing and payment activities.

Job Title: Special Inspector Company: Krazan and Associates Location: Bothell, WA Description: Special Inspector# Positions: 5Location: US-WA-BothellPosted Date: 2/15/2008Category: Technical - Test and InspectionTo be considered for this job:* Please consider me for this jobMore information about this job:Overview:We are looking for 4qualified Special Inspectors. Ideal candidates must possess 2 - 5 years of experience, They must be effective communicators and posses strong decision making skills; be self-disciplined, highly motivated and demonstrate the ability to work independently.Qualifications:* ICC/WABO certified in multiple areas of Special Inspection* ACI Concrete Field Testing Technician Grade I preferred* Nuclear Gauge Safety Training Certification preferred* AWS/CWI certification highly desired* Lab certifications helpful* Ability to read construction plans and specifications* Ability to understand construction procedures* Must be insurable under company vehicle policy* Must be able to lift and move up to 70 poundsAll qualified applicants will receive consideration for employment without regard to race, religion, color, sex, national origin or age.