O&M Technician - Operator
Reference
EPR008688
Posting Reference
Location
Byesville, OH, USA
Type
Full Time
Job Category
Operations
EthosEnergy is currently seeking Operations & Maintenance Technician Operator for our Byesville, OH facility. Guernsey Power Station (GPS) is a $1.6 billion 1,875 MW 3x1x1 GE 7HA.02 combined cycle electric generating facility commissioned in 2023 and located in Guernsey County, OH.
Responsible for the proper operation and maintenance of GPS while assigned to a rotating shift and will be assigned to the Operations Department. These responsibilities include, but are not limited to, the operation, maintenance, and troubleshooting of facility equipment and systems. This equipment includes gas turbines, steam turbines, generators, heat recovery steam generators, air cooled condensers, air compressors, motors, pumps, valves, fire suppression systems, and all other balance of plant auxiliary equipment. This position will report to the Operations Manager.
Job Responsibilities
Operates and maintains a combined cycle generating facility and all associated auxiliary and support equipment with minimal guidance or assistance. Proficient at operating the plant via a remote distributed control system (DCS) and programmable logic controllers (PLC). This position requires making operating decisions based on plant, safety, and environmental rules, regulations, policies, and procedures, and using good judgment based on available operating data. Strictly adheres to all safety and environmental rules and regulations to protect employees and public safety.
Conducts equipment rounds, logs, checklists, and water chemistry analysis to ensure equipment and systems are operating at peak performance. Reads meters, gauges, or automatic devices to record data such as pressures, temperatures, fluid levels, vibration, hours of operation, pressure, and fluid levels, water chemistry to verify operating conditions.
Operate the facility during start-up, shutdown, normal and emergency conditions in accordance with operating procedures and instructions.
Support activities to maintain compliance with all administrative, operational, NERC, HSE and other regulatory programs and procedures.
Fully supports the use of a Computerized Maintenance Management System (CMMS) by demonstrating proficiency in using the system and entering data consistent with the facility maintenance philosophy. Records equipment discrepancies in detail on work orders and documents maintenance actions taken. Executes corrective and preventive maintenance work orders in a timely and high-quality manner. Shows diligence in documenting spare parts usage and re-ordering.
Works closely with water treatment services provider in optimizing steam cycle chemistry performance. Responsible for ordering chemicals through established vendors.
Maintains equipment by tightening fittings, replacing valve packing, gaskets, valves, gauges, etc. and cleaning, replacing, oiling, and lubricating other component parts and equipment as required.
Opens and closes valves and breakers as required for proper system operation and mechanical and electrical isolation.
Performs capital project and/or major program responsibilities as assigned by the Lead OMT or Operations Manager.
Assists other OMTs in repairing and maintaining plant equipment.
Assists in performing CEMS calibrations and gas bottle change outs.
Perform general housekeeping and continuous improvement of the appearance of the facility. Maintain the cleanliness of all areas of the plant and control room, or other duties as assigned.
Ensure all accidents, incidents, near misses, and potential hazards are immediately reported to Facility Management.
Keeps the Lead OMT and/or Facility Management fully informed of unusual plant conditions and current job progress as it relates to facility operations when assigned on-shift.
Works with Facility Management in managing the facility's spare parts inventory, performing audits as needed.
Supports outage planning and scheduling involvement as needed.
Assist with development of Operations and Maintenance procedures as assigned.
Supports the Operator training and qualification program. Ability to qualify as a Control Room Operator and Auxiliary Operator in accordance with established training procedures.
Assist with performing Root Cause Analysis of failures.
May operate plant equipment such manlift and forklift.
Reads, understands, and complies with all regulatory procedures, permits and safety programs.
Will support an atmosphere of employee involvement, trust, and motivation through employee mentoring, participation, empowerment, collaboration, and training.
Foster a team culture which is flexible and adaptable to change, striving for continuous improvement in the accomplishment of work.
Required Skills / Knowledge
Demonstrates knowledge of power plant operations or related industry.
Demonstrates the ability to make competent decisions in emergency situations.
Capable of writing operating procedures, work requests, and written records.
Demonstrate good verbal and written communication skills.
Proficient in Microsoft Office including Excel and Word.
Demonstrates the ability to read and interpret mechanical drawings, electrical one-lines, logic drawings, technical manuals, and P&IDs.
Experience
2 to 4 years related or industry experience and/or training; or a combination of experience and/or education preferred.
Knowledge of advanced technology gas turbines, steam turbines, single shaft arrangements and commissioning experience is preferred but not required.
Power Plant Control Room Operator experience is a plus.
Experience with GE Mark VIe DCS is a plus.
Education Requirements
High School diploma or equivalent required.
Associate's degree (AA) or equivalent from a two-year college or technical school is preferred. Education in power generation, mechanical maintenance, electrical maintenance or instrument and controls is a plus.
Possession of a State of Ohio (or any state) Stationary Steam Engineer's License is a plus.
Physical Requirements
Ability to do walking, reaching, climbing, and lifting (up to 50 pounds).
Must be willing to work a 12-hour rotating shift and be available to work for call-ins and work coverage as needed to support reliable operation of the facility.
Ability to work at heights and in confined spaces.
What We Offer
Annual Salary Range for this position is $76,588.00 - $99,825.00 based on experience and skills set
Supportive company culture that values its employees
Comprehensive Medical, Dental, Vision & 401 K Plan
Paid Parental Leave, Time Off & Holidays
Extra money in your paycheck - Employee Referral Bonus
Personal Development & Career Succession Planning
Company sponsored Perks & Discount programs
EthosEnergy is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.
Reference
EPR008688
Posting Reference
Location
Byesville, OH, USA
Type
Full Time
Job Category
Operations
EthosEnergy is currently seeking Operations & Maintenance Technician Operator for our Byesville, OH facility. Guernsey Power Station (GPS) is a $1.6 billion 1,875 MW 3x1x1 GE 7HA.02 combined cycle electric generating facility commissioned in 2023 and located in Guernsey County, OH.
Responsible for the proper operation and maintenance of GPS while assigned to a rotating shift and will be assigned to the Operations Department. These responsibilities include, but are not limited to, the operation, maintenance, and troubleshooting of facility equipment and systems. This equipment includes gas turbines, steam turbines, generators, heat recovery steam generators, air cooled condensers, air compressors, motors, pumps, valves, fire suppression systems, and all other balance of plant auxiliary equipment. This position will report to the Operations Manager.
Job Responsibilities
Operates and maintains a combined cycle generating facility and all associated auxiliary and support equipment with minimal guidance or assistance. Proficient at operating the plant via a remote distributed control system (DCS) and programmable logic controllers (PLC). This position requires making operating decisions based on plant, safety, and environmental rules, regulations, policies, and procedures, and using good judgment based on available operating data. Strictly adheres to all safety and environmental rules and regulations to protect employees and public safety.
Conducts equipment rounds, logs, checklists, and water chemistry analysis to ensure equipment and systems are operating at peak performance. Reads meters, gauges, or automatic devices to record data such as pressures, temperatures, fluid levels, vibration, hours of operation, pressure, and fluid levels, water chemistry to verify operating conditions.
Operate the facility during start-up, shutdown, normal and emergency conditions in accordance with operating procedures and instructions.
Support activities to maintain compliance with all administrative, operational, NERC, HSE and other regulatory programs and procedures.
Fully supports the use of a Computerized Maintenance Management System (CMMS) by demonstrating proficiency in using the system and entering data consistent with the facility maintenance philosophy. Records equipment discrepancies in detail on work orders and documents maintenance actions taken. Executes corrective and preventive maintenance work orders in a timely and high-quality manner. Shows diligence in documenting spare parts usage and re-ordering.
Works closely with water treatment services provider in optimizing steam cycle chemistry performance. Responsible for ordering chemicals through established vendors.
Maintains equipment by tightening fittings, replacing valve packing, gaskets, valves, gauges, etc. and cleaning, replacing, oiling, and lubricating other component parts and equipment as required.
Opens and closes valves and breakers as required for proper system operation and mechanical and electrical isolation.
Performs capital project and/or major program responsibilities as assigned by the Lead OMT or Operations Manager.
Assists other OMTs in repairing and maintaining plant equipment.
Assists in performing CEMS calibrations and gas bottle change outs.
Perform general housekeeping and continuous improvement of the appearance of the facility. Maintain the cleanliness of all areas of the plant and control room, or other duties as assigned.
Ensure all accidents, incidents, near misses, and potential hazards are immediately reported to Facility Management.
Keeps the Lead OMT and/or Facility Management fully informed of unusual plant conditions and current job progress as it relates to facility operations when assigned on-shift.
Works with Facility Management in managing the facility's spare parts inventory, performing audits as needed.
Supports outage planning and scheduling involvement as needed.
Assist with development of Operations and Maintenance procedures as assigned.
Supports the Operator training and qualification program. Ability to qualify as a Control Room Operator and Auxiliary Operator in accordance with established training procedures.
Assist with performing Root Cause Analysis of failures.
May operate plant equipment such manlift and forklift.
Reads, understands, and complies with all regulatory procedures, permits and safety programs.
Will support an atmosphere of employee involvement, trust, and motivation through employee mentoring, participation, empowerment, collaboration, and training.
Foster a team culture which is flexible and adaptable to change, striving for continuous improvement in the accomplishment of work.
Required Skills / Knowledge
Demonstrates knowledge of power plant operations or related industry.
Demonstrates the ability to make competent decisions in emergency situations.
Capable of writing operating procedures, work requests, and written records.
Demonstrate good verbal and written communication skills.
Proficient in Microsoft Office including Excel and Word.
Demonstrates the ability to read and interpret mechanical drawings, electrical one-lines, logic drawings, technical manuals, and P&IDs.
Experience
2 to 4 years related or industry experience and/or training; or a combination of experience and/or education preferred.
Knowledge of advanced technology gas turbines, steam turbines, single shaft arrangements and commissioning experience is preferred but not required.
Power Plant Control Room Operator experience is a plus.
Experience with GE Mark VIe DCS is a plus.
Education Requirements
High School diploma or equivalent required.
Associate's degree (AA) or equivalent from a two-year college or technical school is preferred. Education in power generation, mechanical maintenance, electrical maintenance or instrument and controls is a plus.
Possession of a State of Ohio (or any state) Stationary Steam Engineer's License is a plus.
Physical Requirements
Ability to do walking, reaching, climbing, and lifting (up to 50 pounds).
Must be willing to work a 12-hour rotating shift and be available to work for call-ins and work coverage as needed to support reliable operation of the facility.
Ability to work at heights and in confined spaces.
What We Offer
Annual Salary Range for this position is $76,588.00 - $99,825.00 based on experience and skills set
Supportive company culture that values its employees
Comprehensive Medical, Dental, Vision & 401 K Plan
Paid Parental Leave, Time Off & Holidays
Extra money in your paycheck - Employee Referral Bonus
Personal Development & Career Succession Planning
Company sponsored Perks & Discount programs
EthosEnergy is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.
Job ID: 477909862
Originally Posted on: 5/21/2025
Want to find more Construction opportunities?
Check out the 178,855 verified Construction jobs on iHireConstruction
Similar Jobs
Sign Up for Job Alerts
