Welder
Welder
Camarillo, CA
Description
Welder (Fusion and Resistance)
Regular, Full-Time; Non-Exempt
Camarillo, CA.
About AllClear Aerospace & Defense
AllClear Aerospace & Defense is the military aviation aftermarket industry's leading provider of mission-ready solutions. We provide excellence in sustainment for the U.S. militaries and its allies. Headquartered in Miramar, Florida, AllClear's sustainment solutions cover over 25 of the most utilized military aircraft platforms, supported with distribution agreements from leading OEMs, in-house and managed repair services, engineered products, manufacturing, and logistics solutions.
AllClear represents more than 30 years of defense aerospace sustainment experience and expertise, focused on the bigger mission mindset of keeping militaries mission ready. AllClear locations include Abu Dhabi, UAE; Camarillo, CA; Cambridge, UK; Chatsworth, CA; Greenville, SC; Macon, GA; Miramar, FL; Seoul, S. Korea; Singapore; South San Francisco, CA; and Tokyo, Japan.
To learn more visit GoAllClear.com.
Summary
The Welder will perform fusion, spot, seam, and/or stud welding on aerospace parts and components per the requirements of specifications as prescribed by engineering drawings and work orders.
Essential Duties and Responsibilities
Under general supervision, must be able to perform a variety of job duties including, but not limited to:
Will clean, tack and weld test coupons and production assemblies using specific instructions for the weld machines.
Fabricate manufacture-welded parts from engineering drawing with minimal to no instruction.
knowledge of the materials and processes to help with development of Weld Schedules and use existing Weld Schedules to produce flight critical welds.
Verify all work to ensure that quality standards are maintained and adhered to all specifications and procedures involving company and customer practices and maintain all weld records.
Collaborate with manufacturing and quality engineering teams to resolve problems and develop new processes and/or procedures.
Perform welding on aircraft and ground support equipment to a qualified Welding Schedule.
Perform certified welding on aerospace parts and components per specifications.
Perform daily preventative maintenance of equipment per schedule and minor maintenance (e.g., changes tips)
Select, position, and secure welding tips in machine tool holder and position work pieces in devices or fixtures.
Adjust machine controls to follow and develop weld schedules to get proper weld strength and cosmetic finish.
Observe operation of machine and verify conformance of welded work piece to specifications.
Set up, adjust, and operate welding equipment to seam weld metal parts or subassemblies in accordance with dimensional specifications.
Weld joints with consistent acceptable results.
Take the initiative to identify problems, develop alternative and proactive solutions and gather/present information in a timely manner.
Provide training support for all welding operations, including training new hires and providing feedback.
Participate in internal and customer audits, including NADCAP and other industry standards
Perform other duties as assigned.
In addition to the above, Welders are to maintain an organized, clean, and safe work area using safety standards and expectations while adhering to all quality practices. AllClear is an Equal Opportunity Employer. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education and Experience
High School Degree or General Education Degree; or 3-5 years of related experience and/or training; or equivalent combination of education and experience
Minimum of 5 years of aerospace experience.
Experience welding base metal groups, Steel, Stainless Steel, Aluminum in accordance with AWS certification C1.1, and D17.2 for any spot, seam, and flash welding
Required Skills:
Language: Ability to read and comprehend simple instructions, short correspondence, and memos.
Reasoning Ability: Ability to apply a general understanding to carry out detailed, written and oral instructions. Ability to deal with and solve problems involving a few concrete variables in standardized situations.
Mathematical Ability: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Other Abilities: Must be able to inspect tensile test coupons produced during weld setup. Must have a thorough understanding of machine functions, weld process, and variables which may impact the process in a positive or negative manner. Must be able to interpret welding symbols and specifications prescribed in engineering drawings. Must be able to read blueprints and job orders for product specifications to determine things such as, dimensions, tolerances, tooling instructions, and sequence of operations.
Physical Demands/ Work Environment:
While performing the duties of this job, the employee must be able to stand and sit 6 to 8 hours a day. Must be able to work with their hands, arms and be extremely accurate. Must be able to walk, sit, stoop, or kneel on a regular basis. The employee must frequently lift and/or move up to 25 pounds. Must be able to lift and/or move up to 40 pounds on an occasional basis.
While performing the duties of this job, the employee is regularly exposed to moving high-speed machinery and mechanical parts. The employee is occasionally exposed to wet and/or humid conditions. outside weather conditions, machine oils, metal fillings, acetone, paints, solvents, grease, cutting fluids, fumes, or airborne particles, toxic or caustic chemicals, and risk of electrical shock or vibration. The noise level in the work environment is usually moderate to loud.
Salary Description
$30.00 - $35.00 per hour
Welder
Camarillo, CA
Description
Welder (Fusion and Resistance)
Regular, Full-Time; Non-Exempt
Camarillo, CA.
About AllClear Aerospace & Defense
AllClear Aerospace & Defense is the military aviation aftermarket industry's leading provider of mission-ready solutions. We provide excellence in sustainment for the U.S. militaries and its allies. Headquartered in Miramar, Florida, AllClear's sustainment solutions cover over 25 of the most utilized military aircraft platforms, supported with distribution agreements from leading OEMs, in-house and managed repair services, engineered products, manufacturing, and logistics solutions.
AllClear represents more than 30 years of defense aerospace sustainment experience and expertise, focused on the bigger mission mindset of keeping militaries mission ready. AllClear locations include Abu Dhabi, UAE; Camarillo, CA; Cambridge, UK; Chatsworth, CA; Greenville, SC; Macon, GA; Miramar, FL; Seoul, S. Korea; Singapore; South San Francisco, CA; and Tokyo, Japan.
To learn more visit GoAllClear.com.
Summary
The Welder will perform fusion, spot, seam, and/or stud welding on aerospace parts and components per the requirements of specifications as prescribed by engineering drawings and work orders.
Essential Duties and Responsibilities
Under general supervision, must be able to perform a variety of job duties including, but not limited to:
Will clean, tack and weld test coupons and production assemblies using specific instructions for the weld machines.
Fabricate manufacture-welded parts from engineering drawing with minimal to no instruction.
knowledge of the materials and processes to help with development of Weld Schedules and use existing Weld Schedules to produce flight critical welds.
Verify all work to ensure that quality standards are maintained and adhered to all specifications and procedures involving company and customer practices and maintain all weld records.
Collaborate with manufacturing and quality engineering teams to resolve problems and develop new processes and/or procedures.
Perform welding on aircraft and ground support equipment to a qualified Welding Schedule.
Perform certified welding on aerospace parts and components per specifications.
Perform daily preventative maintenance of equipment per schedule and minor maintenance (e.g., changes tips)
Select, position, and secure welding tips in machine tool holder and position work pieces in devices or fixtures.
Adjust machine controls to follow and develop weld schedules to get proper weld strength and cosmetic finish.
Observe operation of machine and verify conformance of welded work piece to specifications.
Set up, adjust, and operate welding equipment to seam weld metal parts or subassemblies in accordance with dimensional specifications.
Weld joints with consistent acceptable results.
Take the initiative to identify problems, develop alternative and proactive solutions and gather/present information in a timely manner.
Provide training support for all welding operations, including training new hires and providing feedback.
Participate in internal and customer audits, including NADCAP and other industry standards
Perform other duties as assigned.
In addition to the above, Welders are to maintain an organized, clean, and safe work area using safety standards and expectations while adhering to all quality practices. AllClear is an Equal Opportunity Employer. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education and Experience
High School Degree or General Education Degree; or 3-5 years of related experience and/or training; or equivalent combination of education and experience
Minimum of 5 years of aerospace experience.
Experience welding base metal groups, Steel, Stainless Steel, Aluminum in accordance with AWS certification C1.1, and D17.2 for any spot, seam, and flash welding
Required Skills:
Language: Ability to read and comprehend simple instructions, short correspondence, and memos.
Reasoning Ability: Ability to apply a general understanding to carry out detailed, written and oral instructions. Ability to deal with and solve problems involving a few concrete variables in standardized situations.
Mathematical Ability: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Other Abilities: Must be able to inspect tensile test coupons produced during weld setup. Must have a thorough understanding of machine functions, weld process, and variables which may impact the process in a positive or negative manner. Must be able to interpret welding symbols and specifications prescribed in engineering drawings. Must be able to read blueprints and job orders for product specifications to determine things such as, dimensions, tolerances, tooling instructions, and sequence of operations.
Physical Demands/ Work Environment:
While performing the duties of this job, the employee must be able to stand and sit 6 to 8 hours a day. Must be able to work with their hands, arms and be extremely accurate. Must be able to walk, sit, stoop, or kneel on a regular basis. The employee must frequently lift and/or move up to 25 pounds. Must be able to lift and/or move up to 40 pounds on an occasional basis.
While performing the duties of this job, the employee is regularly exposed to moving high-speed machinery and mechanical parts. The employee is occasionally exposed to wet and/or humid conditions. outside weather conditions, machine oils, metal fillings, acetone, paints, solvents, grease, cutting fluids, fumes, or airborne particles, toxic or caustic chemicals, and risk of electrical shock or vibration. The noise level in the work environment is usually moderate to loud.
Salary Description
$30.00 - $35.00 per hour
Job ID: 480423191
Originally Posted on: 6/8/2025
Want to find more Construction opportunities?
Check out the 178,629 verified Construction jobs on iHireConstruction
Sign Up for Job Alerts
