Design Engineer
Columbus, OH, USA
Req #485
Friday, April 11, 2025
Company Overview
Performance Contracting Group is a national employee-owned specialty contractor that offers quality services and products to the commercial, industrial, and non-residential construction markets. We are committed to recruiting, developing, and advancing employees from a diversity of backgrounds and experiences, as well as supporting a culture of safety and inclusiveness that allows you to contribute to your fullest potential. We place high value on training and professional development, encouraging you to broaden and strengthen your unique skill sets so you can fully realize your potential.
Job Description
PCI is seeking an experiencedDesign Engineerfor its Columbus-582 operations based in Columbus, OH. This individual will be responsible for the following duties:
Attend kick off meeting with design and or operations staff at beginning of project to ensure Level of Development, scope, project details and contract requirements are understood before modeling begins.
Create 3D models utilizing Revit.
Actively participate in BIM coordination and design meetings.
Develop and model scopes as requested, including, but not limited to,Interior and Exterior Walls, including framing, Ceiling and Soffit Framing, Acoustical Ceilings, Specialty Panels, Raised Access Floor, Clean Room Walls, Clean Room Ceilings, Unistrut, No Fly Zones and other specialty scopes to required Level of Development using Revit, and other Revit add-on programs.
Coordinate with point cloud files.
Ensure models produced are spatially coordinated.
Escalate any issues to the BIM Coordinator and Design or Operations Team.
Elevate model and document inconsistencies to the attention of the BIM Coordinator and Design/Operations Team to determine what action is to be taken.
Ensure all elements of the model are fully coordinated within PCI's scope.
Perform BIM compliance checks of deliverables.
QC model against project documents for discrepancies.
Utilize Navisworks Manage to run clash detection and identify potential issues.
Use Navisworks to resolve PCI clashes.
Attend staff training to enhance staff members' knowledge and expertise of the standardized software used.
Create and maintain project-specific content to ensure they are consistently aligned with instructions, guidelines, in-house standards, and the project's BIM standards.
Actively engage with Designand Operations Teamto implement best BIM/VDC practices.
Provide & design support tasks including but not limited to: processing install drawings, incorporating comments, Producing details and layout files.
Clean, prepare, and organize CAD/Navisworksfiles for field use.
Special projects as assigned.
Basic Requirements:
Bachelor's degree in related discipline (Construction Management, Construction Science, Architecture, Engineering Fields, etc.) preferred.
2-year technical degree or 2 years of relevant experience in lieu of degree.
4+ years of BIM (Revit)/VDC modeling and coordination experience.
Must possess proficiency with software platforms including Revit, AutoCAD, NavisworksManage, and BIM 360 Design/Glue.
Must be able to present a portfolio demonstrating work in Revit and Revit Family Editor.
Experience with Bluebeam PDF Software.
Ability to understand design and document coordination.
Innovative and creatively minded individual looking to improve process, procedure, and construction techniques to provide continued improvement and efficiency to role, work scopes, and our customers.
Ability to take responsibility for the outcome and results of assigned projects.
Proficient skills in Microsoft Excel & Microsoft Word.
Proficient written and verbal communication skills.
Motivated self-start
Columbus, OH, USA
Req #485
Friday, April 11, 2025
Company Overview
Performance Contracting Group is a national employee-owned specialty contractor that offers quality services and products to the commercial, industrial, and non-residential construction markets. We are committed to recruiting, developing, and advancing employees from a diversity of backgrounds and experiences, as well as supporting a culture of safety and inclusiveness that allows you to contribute to your fullest potential. We place high value on training and professional development, encouraging you to broaden and strengthen your unique skill sets so you can fully realize your potential.
Job Description
PCI is seeking an experiencedDesign Engineerfor its Columbus-582 operations based in Columbus, OH. This individual will be responsible for the following duties:
Attend kick off meeting with design and or operations staff at beginning of project to ensure Level of Development, scope, project details and contract requirements are understood before modeling begins.
Create 3D models utilizing Revit.
Actively participate in BIM coordination and design meetings.
Develop and model scopes as requested, including, but not limited to,Interior and Exterior Walls, including framing, Ceiling and Soffit Framing, Acoustical Ceilings, Specialty Panels, Raised Access Floor, Clean Room Walls, Clean Room Ceilings, Unistrut, No Fly Zones and other specialty scopes to required Level of Development using Revit, and other Revit add-on programs.
Coordinate with point cloud files.
Ensure models produced are spatially coordinated.
Escalate any issues to the BIM Coordinator and Design or Operations Team.
Elevate model and document inconsistencies to the attention of the BIM Coordinator and Design/Operations Team to determine what action is to be taken.
Ensure all elements of the model are fully coordinated within PCI's scope.
Perform BIM compliance checks of deliverables.
QC model against project documents for discrepancies.
Utilize Navisworks Manage to run clash detection and identify potential issues.
Use Navisworks to resolve PCI clashes.
Attend staff training to enhance staff members' knowledge and expertise of the standardized software used.
Create and maintain project-specific content to ensure they are consistently aligned with instructions, guidelines, in-house standards, and the project's BIM standards.
Actively engage with Designand Operations Teamto implement best BIM/VDC practices.
Provide & design support tasks including but not limited to: processing install drawings, incorporating comments, Producing details and layout files.
Clean, prepare, and organize CAD/Navisworksfiles for field use.
Special projects as assigned.
Basic Requirements:
Bachelor's degree in related discipline (Construction Management, Construction Science, Architecture, Engineering Fields, etc.) preferred.
2-year technical degree or 2 years of relevant experience in lieu of degree.
4+ years of BIM (Revit)/VDC modeling and coordination experience.
Must possess proficiency with software platforms including Revit, AutoCAD, NavisworksManage, and BIM 360 Design/Glue.
Must be able to present a portfolio demonstrating work in Revit and Revit Family Editor.
Experience with Bluebeam PDF Software.
Ability to understand design and document coordination.
Innovative and creatively minded individual looking to improve process, procedure, and construction techniques to provide continued improvement and efficiency to role, work scopes, and our customers.
Ability to take responsibility for the outcome and results of assigned projects.
Proficient skills in Microsoft Excel & Microsoft Word.
Proficient written and verbal communication skills.
Motivated self-start
Job ID: 481944183
Originally Posted on: 6/19/2025
Want to find more Construction opportunities?
Check out the 176,970 verified Construction jobs on iHireConstruction
Similar Jobs
Sign Up for Job Alerts
