Electrical Design Engineer III
Location:
Huntsville, Alabama
Type:
Direct Hire
Job #61220
Salary:
$120,000 - $150,000 Per Year
We are seeking an Electrical Design Engineer III for our location in Huntsville, AL. This is a full time onsite position working for a government contractor.
Job Summary:
Designs, develops, modifies and evaluates electrical systems and equipment, electronic parts, components or integrated circuitry for electrical and electronic equipment, and/or other hardware systems found in industrial plants and applications. The systems, equipment and skids are process and mechanical systems and equipment found in nuclear power plants, commercial and government nuclear fuel processing plants, chemical plants, refineries and power plants. All work may be required to be completed per the requirements of ASME NQA-1, 10CFR50 and 10CFR21 so familiarity and experience working within the rigors of those QA standards is a plus. Determines design approaches and parameters. Selects components and equipment based on analysis of specifications and reliability. May also review vendor capability to support product development. May use computer-assisted engineering and design software and equipment to perform assignments. Applies principles and techniques of electrical engineering to accomplish goals. Works on complex issues where analysis of situations or data requires an in-depth evaluation of variable factors. Relies on extensive experience and judgment to plan and accomplish goals. A wide degree of creativity and latitude is expected determine methods, techniques and evaluation criteria for obtaining results. May supervise the activities of others.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Provides analysis related to the design, development, and implementation of electrical parts, components, electrical systems and equipment used with and to support process, mechanical and electrical hardware systems and equipment.
Develops test strategies, devices, and systems.
Plan and implement research methodology and procedures to apply principles of electrical theory to engineering projects
Analyzes equipment to establish operating data, conducts experimental tests and evaluates results
Performs stress and performance tests on a variety of computer hardware including circuit boards, processors and wiring
Operate computer-assisted engineering and design software and equipment to perform engineering tasks
Prepares and studies technical drawings, specifications of electrical systems, to ensure conformity to standards and customer requirements
Generates architecture for functional components and assists with product architecture
Delivers hardware designs through prototype, beta, and production release in compliance with product development process and quality practices
Supports existing products by troubleshooting and failure analysis
Generates architecture for functional components and assist with product architecture
Qualifications
Proficient in ETAP software for electrical system modeling, analysis, and simulation.
Ability to utilize Electrical Analysis packages such as ETAP (or SKM) to perform load flow, short circuit, harmonic analysis, motor starting, AC and DC Arc Flash studies and protection/ coordination studies for low voltage systems of moderate complexity.
Experience with developing calculations using the Nuclear qualified version of ETAP is preferred.
Strong understanding of and experience with IEEE standards applicable to industrial, commercial, and nuclear electrical systems.
In-depth knowledge of NFPA 70 (National Electrical Code), NFPA 70E (Standard for Electrical Safety in the Workplace), NFPA 79 (Electrical Standard for Industrial Machinery), UL-508A (Standard for Industrial Control Panels).
Familiarity with NRC General Design Criteria (10 CFR Part 50, Appendix A) and NRC Regulatory Guides or NAVSEA equivalents relevant to electrical engineering in nuclear facilities.
Familiarity with MIL-STD-461G and EMI/RFI testing, including test planning, execution, and mitigation strategies for electromagnetic compatibility.
Ability to interpret and develop machine wiring diagrams, schematics, and cable schedules/drawings.
Experience with power distribution systems, short circuit analysis, load flow studies, and protective device coordination.
Familiarity with government contracts, including preparation and review of proposals, Basis of Estimates (BOEs) and cost/pricing documentation is a plus.
Bachelor's degree in Electrical Engineering (Master's preferred); PE license is a plus.
Ability to conceptualize an electrical design of high complexity for nuclear and non-nuclear projects during the bid phase of projects.
Ability to mentor entry level and junior level engineers.
Lead or serve as oversight on electrical designs and FAT testing per customer ISA 9001 or NQA-1 requirements for commercial and DOE customers.
Ability to assess existing manufacturing building electrical infrastructure and determine required electrical modifications to support new project.
Ability to assess existing manufacturing building electrical infrastructure and determine required electrical modifications to support new projects.
Preferred Qualifications:
Certified UL-508A Manufacturer Technical Representative (MTR) a plus
Working knowledge of IEEE grounding standards, IEEE color books, IEC and DOE electrical standards is preferred.
Education and/or Experience
Bachelor's degree (B.S.) from four-year college or university in a related field and 5-10 years of directly related experience and/or training; or equivalent combination of education and experience. Master's degree (M.S.) and a minimum of 3 years of directly related experience is admissible.
Other Skills and Abilities
Basic Knowledge of ISO and/or AS9100
Working knowledge of Lean Manufacturing/6 Sigma/Kaizen
Knowledge of specific software (design, analysis, ERP)
Other Qualifications
Active PE License preferred. If the candidate does not have a PE License successful completion of Fundamentals of Engineering Exam is a plus
Willingness to stamp and certify designs under responsible charge.
US Citizenship with ability to attain/maintain government security clearance
Location:
Huntsville, Alabama
Type:
Direct Hire
Job #61220
Salary:
$120,000 - $150,000 Per Year
We are seeking an Electrical Design Engineer III for our location in Huntsville, AL. This is a full time onsite position working for a government contractor.
Job Summary:
Designs, develops, modifies and evaluates electrical systems and equipment, electronic parts, components or integrated circuitry for electrical and electronic equipment, and/or other hardware systems found in industrial plants and applications. The systems, equipment and skids are process and mechanical systems and equipment found in nuclear power plants, commercial and government nuclear fuel processing plants, chemical plants, refineries and power plants. All work may be required to be completed per the requirements of ASME NQA-1, 10CFR50 and 10CFR21 so familiarity and experience working within the rigors of those QA standards is a plus. Determines design approaches and parameters. Selects components and equipment based on analysis of specifications and reliability. May also review vendor capability to support product development. May use computer-assisted engineering and design software and equipment to perform assignments. Applies principles and techniques of electrical engineering to accomplish goals. Works on complex issues where analysis of situations or data requires an in-depth evaluation of variable factors. Relies on extensive experience and judgment to plan and accomplish goals. A wide degree of creativity and latitude is expected determine methods, techniques and evaluation criteria for obtaining results. May supervise the activities of others.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Provides analysis related to the design, development, and implementation of electrical parts, components, electrical systems and equipment used with and to support process, mechanical and electrical hardware systems and equipment.
Develops test strategies, devices, and systems.
Plan and implement research methodology and procedures to apply principles of electrical theory to engineering projects
Analyzes equipment to establish operating data, conducts experimental tests and evaluates results
Performs stress and performance tests on a variety of computer hardware including circuit boards, processors and wiring
Operate computer-assisted engineering and design software and equipment to perform engineering tasks
Prepares and studies technical drawings, specifications of electrical systems, to ensure conformity to standards and customer requirements
Generates architecture for functional components and assists with product architecture
Delivers hardware designs through prototype, beta, and production release in compliance with product development process and quality practices
Supports existing products by troubleshooting and failure analysis
Generates architecture for functional components and assist with product architecture
Qualifications
Proficient in ETAP software for electrical system modeling, analysis, and simulation.
Ability to utilize Electrical Analysis packages such as ETAP (or SKM) to perform load flow, short circuit, harmonic analysis, motor starting, AC and DC Arc Flash studies and protection/ coordination studies for low voltage systems of moderate complexity.
Experience with developing calculations using the Nuclear qualified version of ETAP is preferred.
Strong understanding of and experience with IEEE standards applicable to industrial, commercial, and nuclear electrical systems.
In-depth knowledge of NFPA 70 (National Electrical Code), NFPA 70E (Standard for Electrical Safety in the Workplace), NFPA 79 (Electrical Standard for Industrial Machinery), UL-508A (Standard for Industrial Control Panels).
Familiarity with NRC General Design Criteria (10 CFR Part 50, Appendix A) and NRC Regulatory Guides or NAVSEA equivalents relevant to electrical engineering in nuclear facilities.
Familiarity with MIL-STD-461G and EMI/RFI testing, including test planning, execution, and mitigation strategies for electromagnetic compatibility.
Ability to interpret and develop machine wiring diagrams, schematics, and cable schedules/drawings.
Experience with power distribution systems, short circuit analysis, load flow studies, and protective device coordination.
Familiarity with government contracts, including preparation and review of proposals, Basis of Estimates (BOEs) and cost/pricing documentation is a plus.
Bachelor's degree in Electrical Engineering (Master's preferred); PE license is a plus.
Ability to conceptualize an electrical design of high complexity for nuclear and non-nuclear projects during the bid phase of projects.
Ability to mentor entry level and junior level engineers.
Lead or serve as oversight on electrical designs and FAT testing per customer ISA 9001 or NQA-1 requirements for commercial and DOE customers.
Ability to assess existing manufacturing building electrical infrastructure and determine required electrical modifications to support new project.
Ability to assess existing manufacturing building electrical infrastructure and determine required electrical modifications to support new projects.
Preferred Qualifications:
Certified UL-508A Manufacturer Technical Representative (MTR) a plus
Working knowledge of IEEE grounding standards, IEEE color books, IEC and DOE electrical standards is preferred.
Education and/or Experience
Bachelor's degree (B.S.) from four-year college or university in a related field and 5-10 years of directly related experience and/or training; or equivalent combination of education and experience. Master's degree (M.S.) and a minimum of 3 years of directly related experience is admissible.
Other Skills and Abilities
Basic Knowledge of ISO and/or AS9100
Working knowledge of Lean Manufacturing/6 Sigma/Kaizen
Knowledge of specific software (design, analysis, ERP)
Other Qualifications
Active PE License preferred. If the candidate does not have a PE License successful completion of Fundamentals of Engineering Exam is a plus
Willingness to stamp and certify designs under responsible charge.
US Citizenship with ability to attain/maintain government security clearance
Job ID: 484248002
Originally Posted on: 7/6/2025
Want to find more Construction opportunities?
Check out the 174,199 verified Construction jobs on iHireConstruction
Sign Up for Job Alerts
