Electrician**
**Job Description**
This position involves working with wiring schematics and layout drawings to wire control panels. The electrician will also be responsible for completing temporary interconnect wiring for testing procedures under supervision, as well as various maintenance and troubleshooting tasks for plant equipment. Travel is infrequent but may be required, and some overtime may be necessary.
**Responsibilities**
+ Complete panel building, sensor installation, and machine wiring.
+ Perform temporary interconnect wiring for testing procedures.
+ Conduct maintenance and troubleshooting tasks for plant equipment as needed.
+ Read and interpret electrical schematics and layout drawings.
+ Mount inverter drives, PLCs, circuit breakers, transformers, relays, contractors, and terminals.
+ Utilize hand tools and basic electrical testing equipment.
+ Use drill, tap, and knockout punches for component mounting inside control panels.
+ Perform point-to-point wiring of internal components.
+ Familiarize with electric motor connections for testing.
**Essential Skills**
+ At least 5 years of previous industrial control panel and machine wiring experience.
+ Ability to learn and perform LOTO procedures.
+ Proficiency in reading and interpreting electrical schematics and basic layout drawings.
+ Competence in using hand tools, hand crimpers, wire cutters, wire strippers, and electrical testing equipment.
+ Familiarity with EMT, Flex, and Rigid conduit (training provided).
**Additional Skills & Qualifications**
+ Basic tool kit required with various size and type screwdrivers, wrenches, ratchet and socket set, wire strippers, utility knife, pliers, side cutters, snips, multi-meter, files, hack saw, high-speed drill, tap handle, small hammer, punch, and Tee Square.
+ Specialty tools provided including crimpers, punches, and jig saw.
**Why Work Here?**
Enjoy a comprehensive benefits package including 401(k) with matching, dental and health insurance, a health savings account, life insurance, and paid time off. The work schedule is based on an 8-hour shift, promoting a balanced work-life environment.
**Work Environment**
Work in an old building with older machinery, which is not climate controlled. The small shop environment fosters a close-knit community where everyone knows each other.
**Job Type & Location**
This is a Contract position based out of Fort Mill, South Carolina.
**Pay and Benefits**
The pay range for this position is $20.00 - $28.00/hr.
Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:
Medical, dental & vision
Critical Illness, Accident, and Hospital
401(k) Retirement Plan Pre-tax and Roth post-tax contributions available
Life Insurance (Voluntary Life & AD&D for the employee and dependents)
Short and long-term disability
Health Spending Account (HSA)
Transportation benefits
Employee Assistance Program
Time Off/Leave (PTO, Vacation or Sick Leave)
**Workplace Type**
This is a fully onsite position in Fort Mill,SC.
**Application Deadline**
This position is anticipated to close on Aug 13, 2025.
**About Aerotek:**
We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
**Job Description**
This position involves working with wiring schematics and layout drawings to wire control panels. The electrician will also be responsible for completing temporary interconnect wiring for testing procedures under supervision, as well as various maintenance and troubleshooting tasks for plant equipment. Travel is infrequent but may be required, and some overtime may be necessary.
**Responsibilities**
+ Complete panel building, sensor installation, and machine wiring.
+ Perform temporary interconnect wiring for testing procedures.
+ Conduct maintenance and troubleshooting tasks for plant equipment as needed.
+ Read and interpret electrical schematics and layout drawings.
+ Mount inverter drives, PLCs, circuit breakers, transformers, relays, contractors, and terminals.
+ Utilize hand tools and basic electrical testing equipment.
+ Use drill, tap, and knockout punches for component mounting inside control panels.
+ Perform point-to-point wiring of internal components.
+ Familiarize with electric motor connections for testing.
**Essential Skills**
+ At least 5 years of previous industrial control panel and machine wiring experience.
+ Ability to learn and perform LOTO procedures.
+ Proficiency in reading and interpreting electrical schematics and basic layout drawings.
+ Competence in using hand tools, hand crimpers, wire cutters, wire strippers, and electrical testing equipment.
+ Familiarity with EMT, Flex, and Rigid conduit (training provided).
**Additional Skills & Qualifications**
+ Basic tool kit required with various size and type screwdrivers, wrenches, ratchet and socket set, wire strippers, utility knife, pliers, side cutters, snips, multi-meter, files, hack saw, high-speed drill, tap handle, small hammer, punch, and Tee Square.
+ Specialty tools provided including crimpers, punches, and jig saw.
**Why Work Here?**
Enjoy a comprehensive benefits package including 401(k) with matching, dental and health insurance, a health savings account, life insurance, and paid time off. The work schedule is based on an 8-hour shift, promoting a balanced work-life environment.
**Work Environment**
Work in an old building with older machinery, which is not climate controlled. The small shop environment fosters a close-knit community where everyone knows each other.
**Job Type & Location**
This is a Contract position based out of Fort Mill, South Carolina.
**Pay and Benefits**
The pay range for this position is $20.00 - $28.00/hr.
Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:
Medical, dental & vision
Critical Illness, Accident, and Hospital
401(k) Retirement Plan Pre-tax and Roth post-tax contributions available
Life Insurance (Voluntary Life & AD&D for the employee and dependents)
Short and long-term disability
Health Spending Account (HSA)
Transportation benefits
Employee Assistance Program
Time Off/Leave (PTO, Vacation or Sick Leave)
**Workplace Type**
This is a fully onsite position in Fort Mill,SC.
**Application Deadline**
This position is anticipated to close on Aug 13, 2025.
**About Aerotek:**
We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Job ID: 487464578
Originally Posted on: 7/31/2025
Want to find more Construction opportunities?
Check out the 169,324 verified Construction jobs on iHireConstruction
Sign Up for Job Alerts
