Post
MILLWRIGHT - Austin Industrial - Selma, AL
Job Category: Craft
Requisition Number: MILLW025263
Posting Details
Posted: June 5, 2025
Full-Time
Locations
Showing 1 location
Selma, AL, USA
Job Details
Description
Millwright
Must be able to install, repair, replace and dismantle the machinery and heavy equipment used in industrial settings. This is aplished by performing the following essential duties and responsibilities. Other duties may be assigned.
Specific Duties and Responsibilities:
Replace defective parts of machine or adjust clearances and alignment of moving parts.
Align machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, and plumb bobs.
Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation.
Repair and lubricate machines and equipment.
Assemble and install equipment, using hand tools and power tools.
Position steel beams to support bedplates of machines and equipment, using blues and schematic drawings, to determine work procedures.
Signal crane operator to lower basic assembly units to bedplate and align unit to centerline.
Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
Move machinery and equipment, using hoists, dollies, rollers, and trucks.
Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools.
Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.
Lay out mounting holes, using measuring instruments, and drill holes with power drill.
Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit.
Level bedplate and establish centerline, using straightedge, levels, and transit.
Dismantle machines, using hammers, wrenches, crowbars, and other hand tools.
Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment.
Dismantle machinery and equipment for shipment to installation site, usually performing installation and maintenance work as part of team.
Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel.
Operate engine lathe to grind, file, and turn machine parts to dimensional specifications.
Other duties as assigned.
Qualifications Required for this Position:
Education - no minimum education requirements.
Experience - 3-5 years of Journeyman level experience.
Austin Industrial is an Equal Opportunity Employer.
See the Know Your Rights poster available in English and Spanish.
No Third-Party Inquiries Please
This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so (e., payment must be required pursuant to the terms of a written agreement).
Accessibility Note
If you are a job seeker with a disability and require reasonable amodation to for one of our jobs or have accessibility concerns, please contact the People Services Teamat ....
Qualifications
Licenses & Certifications
Required
Valid State ID
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
MILLWRIGHT - Austin Industrial - Selma, AL
Job Category: Craft
Requisition Number: MILLW025263
Posting Details
Posted: June 5, 2025
Full-Time
Locations
Showing 1 location
Selma, AL, USA
Job Details
Description
Millwright
Must be able to install, repair, replace and dismantle the machinery and heavy equipment used in industrial settings. This is aplished by performing the following essential duties and responsibilities. Other duties may be assigned.
Specific Duties and Responsibilities:
Replace defective parts of machine or adjust clearances and alignment of moving parts.
Align machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, and plumb bobs.
Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation.
Repair and lubricate machines and equipment.
Assemble and install equipment, using hand tools and power tools.
Position steel beams to support bedplates of machines and equipment, using blues and schematic drawings, to determine work procedures.
Signal crane operator to lower basic assembly units to bedplate and align unit to centerline.
Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
Move machinery and equipment, using hoists, dollies, rollers, and trucks.
Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools.
Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.
Lay out mounting holes, using measuring instruments, and drill holes with power drill.
Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit.
Level bedplate and establish centerline, using straightedge, levels, and transit.
Dismantle machines, using hammers, wrenches, crowbars, and other hand tools.
Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment.
Dismantle machinery and equipment for shipment to installation site, usually performing installation and maintenance work as part of team.
Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel.
Operate engine lathe to grind, file, and turn machine parts to dimensional specifications.
Other duties as assigned.
Qualifications Required for this Position:
Education - no minimum education requirements.
Experience - 3-5 years of Journeyman level experience.
Austin Industrial is an Equal Opportunity Employer.
See the Know Your Rights poster available in English and Spanish.
No Third-Party Inquiries Please
This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so (e., payment must be required pursuant to the terms of a written agreement).
Accessibility Note
If you are a job seeker with a disability and require reasonable amodation to for one of our jobs or have accessibility concerns, please contact the People Services Teamat ....
Qualifications
Licenses & Certifications
Required
Valid State ID
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
Job ID: 480418761
Originally Posted on: 6/8/2025
Want to find more Construction opportunities?
Check out the 178,640 verified Construction jobs on iHireConstruction
Similar Jobs
Sign Up for Job Alerts
