Welder
Job Number: 358025
Category: Skilled Trades
Description: Overall Summary:
2nd shift hours: 2:30pm to 11pm (M-F)
The primary function of this position is to weld a high-quality weldment across a high mix of fabricated materials (aluminum, stainless steel, steel) and range of thickness used in our manufacturing process efficiently.
Primary and Essential Duties and Responsibilities:
Ability to operate GMAW (MIG) / GTAW (TIG) and follow WPS welding processes(3G/3F)
* RWMA (Spot weld) resistance welding processes and follow WPS welding processes
* Ability to operate an oxy-acetylene torch (brazing process a plus)
* Knowledge of weld symbols and where to look them up
* Able to demonstrate basics of blueprinting reading
* Able to read a tape measure and calipers (converting fraction and decimals)
* Basic knowledge of welding techniques, materials, and equipment
* Proficient in using shop tools related to welding fit up (such as grinders)
* Follows both visual and written work instructions in order to complete assigned tasks within set time allotted
* Accurately reports shop floor production data via computer terminal and/or written reporting
* Performs operator maintenance on equipment
* Performs cycle counting of parts and material handling duties as required
* Adheres to all quality and safety standards
* Supports, communicates, reinforces and defends the mission, values and culture of the organization
* Supports other projects and performs duties as assigned
Secondary Duties and Responsibilities: May participate in lean /six sigma/quality/safety or other team building initiatives as required
Years of Experience: 1-3 years of industry related experience
Education Requirements: High School diploma or GED preferred. In lieu of diploma, relevant work experience demonstrating
the required job skills and abilities needed to successfully perform the job.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty and responsibility listed above satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience / Knowledge / Skills / Abilities:
* Ability to work from verbal and written instructions
* Ability to obtain AWS Certifications for job level within time required timeline
* Operation of small power tools, other hand tools and computerized and high-pressure equipment
* Goal oriented and team focused to ensure completion of projects in a timely manner
* Attention to detail and a commitment to producing high-quality work
* Ability to work independently and as part of a team
* Previous AWS Welding certifications are a plus but not required
Work Environment: The work environment characteristics described here are representative of those an employee
encounters while performing the essential functions of this job:
* Work is accomplished in a moderately clean plant environment.
* The production floor does not have a cooling system.
* The sound level in the work environment may fluctuate due to noises associated with
manufacturing process
* Regularly exposed to dust, odors, oil and/or fumes
Physical Demands: The physical demands described here are representative of those that must be met by an employee to
successfully perform the essential functions of this job:
* Performs all work in accordance with safety and workmanship and good housekeeping specifications
* Frequent lifting of up to 50 lbs., occasional lifting up to 75 lbs.
* Ability to climb ladders, bend, kneel, work overhead with arms, and sit or stand for several hours at a time
* Eye/hand coordination required, with steady and agile hands to operate equipment and tools
* Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus (AWS vision acuity to Jaeger J2 at 12 in)
* Ability to wear proper Personal Protective Equipment (PPE), as required per plant rules
Training:
* New employee safety orientation and training on special tools or software required for job
performance.
Location: Geneva , OH
Minimum Experience (yrs):
Required Education: High School Diploma
Salary: 58,240.00 /hour
Benefits:
Return to search results Email this job to a friend (emailjobs.asp?jo_num=358025)
If you have previously registered with us, pleaseLog in (memberlogin.asp) to apply for this position.
*Logged in members may also add jobs to their job cart
Job Number: 358025
Category: Skilled Trades
Description: Overall Summary:
2nd shift hours: 2:30pm to 11pm (M-F)
The primary function of this position is to weld a high-quality weldment across a high mix of fabricated materials (aluminum, stainless steel, steel) and range of thickness used in our manufacturing process efficiently.
Primary and Essential Duties and Responsibilities:
Ability to operate GMAW (MIG) / GTAW (TIG) and follow WPS welding processes(3G/3F)
* RWMA (Spot weld) resistance welding processes and follow WPS welding processes
* Ability to operate an oxy-acetylene torch (brazing process a plus)
* Knowledge of weld symbols and where to look them up
* Able to demonstrate basics of blueprinting reading
* Able to read a tape measure and calipers (converting fraction and decimals)
* Basic knowledge of welding techniques, materials, and equipment
* Proficient in using shop tools related to welding fit up (such as grinders)
* Follows both visual and written work instructions in order to complete assigned tasks within set time allotted
* Accurately reports shop floor production data via computer terminal and/or written reporting
* Performs operator maintenance on equipment
* Performs cycle counting of parts and material handling duties as required
* Adheres to all quality and safety standards
* Supports, communicates, reinforces and defends the mission, values and culture of the organization
* Supports other projects and performs duties as assigned
Secondary Duties and Responsibilities: May participate in lean /six sigma/quality/safety or other team building initiatives as required
Years of Experience: 1-3 years of industry related experience
Education Requirements: High School diploma or GED preferred. In lieu of diploma, relevant work experience demonstrating
the required job skills and abilities needed to successfully perform the job.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty and responsibility listed above satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience / Knowledge / Skills / Abilities:
* Ability to work from verbal and written instructions
* Ability to obtain AWS Certifications for job level within time required timeline
* Operation of small power tools, other hand tools and computerized and high-pressure equipment
* Goal oriented and team focused to ensure completion of projects in a timely manner
* Attention to detail and a commitment to producing high-quality work
* Ability to work independently and as part of a team
* Previous AWS Welding certifications are a plus but not required
Work Environment: The work environment characteristics described here are representative of those an employee
encounters while performing the essential functions of this job:
* Work is accomplished in a moderately clean plant environment.
* The production floor does not have a cooling system.
* The sound level in the work environment may fluctuate due to noises associated with
manufacturing process
* Regularly exposed to dust, odors, oil and/or fumes
Physical Demands: The physical demands described here are representative of those that must be met by an employee to
successfully perform the essential functions of this job:
* Performs all work in accordance with safety and workmanship and good housekeeping specifications
* Frequent lifting of up to 50 lbs., occasional lifting up to 75 lbs.
* Ability to climb ladders, bend, kneel, work overhead with arms, and sit or stand for several hours at a time
* Eye/hand coordination required, with steady and agile hands to operate equipment and tools
* Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus (AWS vision acuity to Jaeger J2 at 12 in)
* Ability to wear proper Personal Protective Equipment (PPE), as required per plant rules
Training:
* New employee safety orientation and training on special tools or software required for job
performance.
Location: Geneva , OH
Minimum Experience (yrs):
Required Education: High School Diploma
Salary: 58,240.00 /hour
Benefits:
Return to search results Email this job to a friend (emailjobs.asp?jo_num=358025)
If you have previously registered with us, pleaseLog in (memberlogin.asp) to apply for this position.
*Logged in members may also add jobs to their job cart
Job ID: 481055290
Originally Posted on: 6/13/2025
Want to find more Construction opportunities?
Check out the 183,730 verified Construction jobs on iHireConstruction
Sign Up for Job Alerts
