Finisher III - Painter - 224494

JOB REQUIREMENTS: Finisher III - Painter - 224494

DESCRIPTION/RESPONSIBILITIES: ESSENTIAL FUNCTIONS / RESPONSIBILITIES:

Associates to perform all safety checks at the start of their shift this

includes by not limited to all cranes and tools and complete the

necessary documentation. Continue to perform safety checks throughout

the shift. \* Painting of all manufactured products. \* Apply coatings

to assembled products. \* Proper usage and maintenance of respiratory

equipment. \* Mixing and thinning of coatings per manufacturing

recommendations. \* Safe and proper sealing of storage of unused

coatings. \* Cleaning of painting equipment with proper disposal of

material(s) used in the cleaning process. \* Replenishing of paint in

pressure pots. \* Verification of adequate coverage of coating on

finished products. \* Proper completion of applicable paperwork for

painting. \* Operation of cranes, hoists, and forklifts as needed. Also

successfully complete any training, safety program relating to the

operation of the equipment. \* Paint verification form to be completed

as necessary. \* Ability to read and interpret blueprints and finishing

specifications as they relate to finishing products. \* Work with the

supervisor/foreman and EHS manager to ensure all safety and

environmental regulations are followed. \* Knowledge of (M)SDS sheets.

\* Ability to work off a bill of lading to complete shipments and have

the ability to locate inventory. \* Inventory, environmental control and

documentation duties as assigned. \* Job may require handling or moving

of hazardous waste. \* Adhere to and abide by all ITAR-specific job

standards and training. Protect and properly safeguard ITAR-sensitive

information and work product; ensure dissemination or disclosure of and

access to \"protected data\" occurs only with those trained and approved

for exposure to ITAR content. \* IMMEDIATELY notify Supervisor/Manager,

Human Resources, Legal (email: ...) or the Samuel

Ethics Alert Hotline of known or suspected unauthorized disclosure,

release of or access to protected ITAR content. POSITION TYPE/EXPECTED

HOURS of WORK: \* This is a full-time position. Days and hours of work

are 40 hours, Monday through Friday; to be determined by each division.

Standard hour requirement is four (4) ten (10) hour shifts. Overtime

hours may be required beyond standard schedule. \* Travel is not

required. WORK ENVIRONMENT: The work environment characteristics

described are representative of those an employee encounters while

performing the essential functions of this job. Reasonable

accommodations may be made to enable individuals with disabilities to

perform the essential functions. This job description is not intended to

be all inclusive, and the employee will also perform other reasonably

related business duties as assigned by immediate supervisor and other

management, as required. Staffing of positions to be determined by the

company. As an employee, you are required to understand the ISO system

and the elements that affect your job. The Finisher III shall have the

responsibility of following all specific quality instructions and

reporting all non conforming material or conflicting instructions to the

quality assurance department. Must prove that employee can meet the

essential duties of the job within 90 days by completing employee

training checklist F-HR-720-02-03-15. Equal Opportunity Employer

\*\*\*\*\* OTHER EXPERIENCE AND QUALIFICATIONS: EQUIPMENT KNOWLEDGE: \*

Medically cleared and documented for respirator by nurse and EHS per

company policy. \* Paint spray guns and related hardware. \* Pressure

pots/Agitator mechanisms. \* Mill thickness gauge. ROLE REQUIREMENTS: \*

Ability to work will in a fast paced environment to meet team

expectations. \* Understanding and support of Company policies and

procedures. \* Ability to understand and abide by all safety rules and

regulations to perform th job. \* Must have some knowledge with

painting and shipping of products. \* Must have a basic understanding of

computers. \* Must have reading, writing and simple math skills. \* Must

be able to read blue prints. \* Must have either a High School diploma,

GED, or at least 1 year working experience in an industrial based

environment. PHYSICAL REQUIREMENTS: The physical demands described here

are representative of those that must be met by an employee to

successfully preform the essential functions of this job. Reasonable

accommodations may be made to enable individuals with disabilities to

perform the essential functions. \*\*\*\*\* APPLICATION INSTRUCTIONS:

Apply Online:

Other: Applicants ONLY to apply via URL link provided!