Structural Design Engineer
APR Consulting, Inc.
View Employer's Profile
FOLLOW EMPLOYER
Yesterday
Secret
Mid Level Career (5+ yrs experience)
Engineering - Systems
Houston, TX (ON-SITE/OFFICE)Aliso Viejo, CA (ON-SITE/OFFICE)Aiken, SC (ON-SITE/OFFICE)
Our client, a global engineering, procurement, and construction company is seeking a Structural Design Engineer who will serves as a staff engineer performing engineering assignment of intermediate complexity.
Title: Structural Design Engineer
Location: Houston, TX
Duration: 12 months or longer
Pay rate: $60/hr on W2 (depending on experience)
Responsibilities:
The purpose of this position is to provide essential technical knowledge and perform engineering work as described below.
This position serves as a staff engineer performing engineering assignments of intermediate complexity.
Under direct supervision of the Discipline Lead Engineer or Area Lead Engineer, analyze and make independent recommendations regarding technical solutions to problems of intermediate complexity in accordance with project requirements
Develop and review specifications and design criteria
Perform and check engineering analyses and calculations; specify materials, equipment and systems; and solve technical problems of intermediate complexity
Coordinate technical issues with other disciplines, project management, vendors and clients
Execute work in compliance with Project Quality Plan and procedures
Execute work in accordance with the approved project scope, cost and schedule baselines
Establish, control and report on material key quantities; provide analysis and forecasts
Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations and review of vendor submittals
Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes
Other duties as assigned
Basic Job Requirements
U.S. Citizenship required
Bachelor of Science degree in Civil or Structural Engineering and minimum five (5) years of work-related experience
Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards
Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors
Job related technical knowledge necessary to complete the job
Intermediate knowledge of discipline codes and standards
Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines
Ability to attend to detail and work in a time-conscious and time-effective manner
Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs
Experience providing engineering, procurement and construction (EPC) services on commercial or industrial projects
Proficiency executing EPC projects utilizing engineering analysis, 3D modeling and 2D computer-aided drafting and design (CADD) automation tools in a multi-discipline environment
Discipline Specific Job Requirements
U.S. Intermediate knowledge of performing hand and computer calculations for foundations, concrete, and steel structures
Intermediate knowledge of one or more of the following structural design software: STAAD, STAADPro and RISA3D
Intermediate knowledge of Mathcad
Intermediate knowledge of:
? Analyzing complex structures
? Wind and seismic loading in structural calculations
? Dynamic analysis and design
? Computer modeling and analysis
? Blast design
Preferred Qualification
Professional Engineer license
Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1
Practical field experience
EPC project experience for the following industries:
? U.S Department of Energy or other U.S. Federal Government Agency
? Nuclear facilities under a nuclear quality assurance program
? Manufacturing, pharmaceutical or biotechnology
Proficiency in the use of STAADPro and Mathcad
About our client:
Our client, headquartered in Texas, is a global engineering, procurement, and construction company working with leaders in the energy, infrastructure, life sciences, advanced technologies, mining, and metals industries, as well as government agencies.
About APR:
Since 1980 APR Consulting, Inc. has provided professional recruiting and contingent workforce solutions to a diverse mix of clients, industries, and skill sets nationwide.
Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.
We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.
Don't miss out on this amazing opportunity! If you feel your experience is the match for this position, please apply today and join our team. We look forward to working with you!
#SLA
Our client, a global engineering, procurement, and construction company is seeking a Structural Design Engineer who will serves as a staff engineer performing engineering assignment of intermediate complexity.
Title: Structural Design Engineer
Location: Houston, TX
Duration: 12 months or longer
Pay rate: $60/hr on W2 (depending on experience)
Responsibilities:
The purpose of this position is to provide essential technical knowledge and perform engineering work as described below.
This position serves as a staff engineer performing engineering assignments of intermediate complexity.
Under direct supervision of the Discipline Lead Engineer or Area Lead Engineer, analyze and make independent recommendations regarding technical solutions to problems of intermediate complexity in accordance with project requirements
Develop and review specifications and design criteria
Perform and check engineering analyses and calculations; specify materials, equipment and systems; and solve technical problems of intermediate complexity
Coordinate technical issues with other disciplines, project management, vendors and clients
Execute work in compliance with Project Quality Plan and procedures
Execute work in accordance with the approved project scope, cost and schedule baselines
Establish, control and report on material key quantities; provide analysis and forecasts
Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations and review of vendor submittals
Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes
Other duties as assigned
Basic Job Requirements
U.S. Citizenship required
Bachelor of Science degree in Civil or Structural Engineering and minimum five (5) years of work-related experience
Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards
Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors
Job related technical knowledge necessary to complete the job
Intermediate knowledge of discipline codes and standards
Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines
Ability to attend to detail and work in a time-conscious and time-effective manner
Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs
Experience providing engineering, procurement and construction (EPC) services on commercial or industrial projects
Proficiency executing EPC projects utilizing engineering analysis, 3D modeling and 2D computer-aided drafting and design (CADD) automation tools in a multi-discipline environment
Discipline Specific Job Requirements
U.S. Intermediate knowledge of performing hand and computer calculations for foundations, concrete, and steel structures
Intermediate knowledge of one or more of the following structural design software: STAAD, STAADPro and RISA3D
Intermediate knowledge of Mathcad
Intermediate knowledge of:
? Analyzing complex structures
? Wind and seismic loading in structural calculations
? Dynamic analysis and design
? Computer modeling and analysis
? Blast design
Preferred Qualification
Professional Engineer license
Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1
Practical field experience
EPC project experience for the following industries:
? U.S Department of Energy or other U.S. Federal Government Agency
? Nuclear facilities under a nuclear quality assurance program
? Manufacturing, pharmaceutical or biotechnology
Proficiency in the use of STAADPro and Mathcad
About our client:
Our client, headquartered in Texas, is a global engineering, procurement, and construction company working with leaders in the energy, infrastructure, life sciences, advanced technologies, mining, and metals industries, as well as government agencies.
About APR:
Since 1980 APR Consulting, Inc. has provided professional recruiting and contingent workforce solutions to a diverse mix of clients, industries, and skill sets nationwide.
Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.
We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.
Don't miss out on this amazing opportunity! If you feel your experience is the match for this position, please apply today and join our team. We look forward to working with you!
#SLA
GROUP ID: apr
N
Name Hidden
Client Relationship Manager
APR Consulting, Inc.
View Employer's Profile
FOLLOW EMPLOYER
Yesterday
Secret
Mid Level Career (5+ yrs experience)
Engineering - Systems
Houston, TX (ON-SITE/OFFICE)Aliso Viejo, CA (ON-SITE/OFFICE)Aiken, SC (ON-SITE/OFFICE)
Our client, a global engineering, procurement, and construction company is seeking a Structural Design Engineer who will serves as a staff engineer performing engineering assignment of intermediate complexity.
Title: Structural Design Engineer
Location: Houston, TX
Duration: 12 months or longer
Pay rate: $60/hr on W2 (depending on experience)
Responsibilities:
The purpose of this position is to provide essential technical knowledge and perform engineering work as described below.
This position serves as a staff engineer performing engineering assignments of intermediate complexity.
Under direct supervision of the Discipline Lead Engineer or Area Lead Engineer, analyze and make independent recommendations regarding technical solutions to problems of intermediate complexity in accordance with project requirements
Develop and review specifications and design criteria
Perform and check engineering analyses and calculations; specify materials, equipment and systems; and solve technical problems of intermediate complexity
Coordinate technical issues with other disciplines, project management, vendors and clients
Execute work in compliance with Project Quality Plan and procedures
Execute work in accordance with the approved project scope, cost and schedule baselines
Establish, control and report on material key quantities; provide analysis and forecasts
Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations and review of vendor submittals
Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes
Other duties as assigned
Basic Job Requirements
U.S. Citizenship required
Bachelor of Science degree in Civil or Structural Engineering and minimum five (5) years of work-related experience
Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards
Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors
Job related technical knowledge necessary to complete the job
Intermediate knowledge of discipline codes and standards
Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines
Ability to attend to detail and work in a time-conscious and time-effective manner
Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs
Experience providing engineering, procurement and construction (EPC) services on commercial or industrial projects
Proficiency executing EPC projects utilizing engineering analysis, 3D modeling and 2D computer-aided drafting and design (CADD) automation tools in a multi-discipline environment
Discipline Specific Job Requirements
U.S. Intermediate knowledge of performing hand and computer calculations for foundations, concrete, and steel structures
Intermediate knowledge of one or more of the following structural design software: STAAD, STAADPro and RISA3D
Intermediate knowledge of Mathcad
Intermediate knowledge of:
? Analyzing complex structures
? Wind and seismic loading in structural calculations
? Dynamic analysis and design
? Computer modeling and analysis
? Blast design
Preferred Qualification
Professional Engineer license
Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1
Practical field experience
EPC project experience for the following industries:
? U.S Department of Energy or other U.S. Federal Government Agency
? Nuclear facilities under a nuclear quality assurance program
? Manufacturing, pharmaceutical or biotechnology
Proficiency in the use of STAADPro and Mathcad
About our client:
Our client, headquartered in Texas, is a global engineering, procurement, and construction company working with leaders in the energy, infrastructure, life sciences, advanced technologies, mining, and metals industries, as well as government agencies.
About APR:
Since 1980 APR Consulting, Inc. has provided professional recruiting and contingent workforce solutions to a diverse mix of clients, industries, and skill sets nationwide.
Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.
We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.
Don't miss out on this amazing opportunity! If you feel your experience is the match for this position, please apply today and join our team. We look forward to working with you!
#SLA
Our client, a global engineering, procurement, and construction company is seeking a Structural Design Engineer who will serves as a staff engineer performing engineering assignment of intermediate complexity.
Title: Structural Design Engineer
Location: Houston, TX
Duration: 12 months or longer
Pay rate: $60/hr on W2 (depending on experience)
Responsibilities:
The purpose of this position is to provide essential technical knowledge and perform engineering work as described below.
This position serves as a staff engineer performing engineering assignments of intermediate complexity.
Under direct supervision of the Discipline Lead Engineer or Area Lead Engineer, analyze and make independent recommendations regarding technical solutions to problems of intermediate complexity in accordance with project requirements
Develop and review specifications and design criteria
Perform and check engineering analyses and calculations; specify materials, equipment and systems; and solve technical problems of intermediate complexity
Coordinate technical issues with other disciplines, project management, vendors and clients
Execute work in compliance with Project Quality Plan and procedures
Execute work in accordance with the approved project scope, cost and schedule baselines
Establish, control and report on material key quantities; provide analysis and forecasts
Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations and review of vendor submittals
Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes
Other duties as assigned
Basic Job Requirements
U.S. Citizenship required
Bachelor of Science degree in Civil or Structural Engineering and minimum five (5) years of work-related experience
Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards
Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors
Job related technical knowledge necessary to complete the job
Intermediate knowledge of discipline codes and standards
Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines
Ability to attend to detail and work in a time-conscious and time-effective manner
Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs
Experience providing engineering, procurement and construction (EPC) services on commercial or industrial projects
Proficiency executing EPC projects utilizing engineering analysis, 3D modeling and 2D computer-aided drafting and design (CADD) automation tools in a multi-discipline environment
Discipline Specific Job Requirements
U.S. Intermediate knowledge of performing hand and computer calculations for foundations, concrete, and steel structures
Intermediate knowledge of one or more of the following structural design software: STAAD, STAADPro and RISA3D
Intermediate knowledge of Mathcad
Intermediate knowledge of:
? Analyzing complex structures
? Wind and seismic loading in structural calculations
? Dynamic analysis and design
? Computer modeling and analysis
? Blast design
Preferred Qualification
Professional Engineer license
Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1
Practical field experience
EPC project experience for the following industries:
? U.S Department of Energy or other U.S. Federal Government Agency
? Nuclear facilities under a nuclear quality assurance program
? Manufacturing, pharmaceutical or biotechnology
Proficiency in the use of STAADPro and Mathcad
About our client:
Our client, headquartered in Texas, is a global engineering, procurement, and construction company working with leaders in the energy, infrastructure, life sciences, advanced technologies, mining, and metals industries, as well as government agencies.
About APR:
Since 1980 APR Consulting, Inc. has provided professional recruiting and contingent workforce solutions to a diverse mix of clients, industries, and skill sets nationwide.
Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.
We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.
Don't miss out on this amazing opportunity! If you feel your experience is the match for this position, please apply today and join our team. We look forward to working with you!
#SLA
GROUP ID: apr
N
Name Hidden
Client Relationship Manager
Job ID: 483426603
Originally Posted on: 6/30/2025
Want to find more Construction opportunities?
Check out the 174,195 verified Construction jobs on iHireConstruction
Similar Jobs
Sign Up for Job Alerts
