Civil Engineer (Structural)

About the Position: This position is with the U. S. Army Corps of Engineers, Pittsburgh District, Engineering and Construction Division, Structural Design Section, Design Branch, located in Pittsburgh, PA. you may be hired at either the GS 11 with promotion potential to the GS 12 or at the GS 12 full performance level. Who May Apply : Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

• Current Department of Army Civilian Employees
• Current Department of Defense (DOD) Civilian Employee (non-Army)
• Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce
• Interagency Career Transition Assistance Plan
• Land Management Workforce Flexibility Act
• Military Spouses, under Executive Order (E.O.) 13473
• Non-Department of Defense (DoD) Transfer
• People with Disabilities, Schedule A
• Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
• Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
• Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
• Priority Placement Program, DoD Retained Grade Preference Eligible
• Re-employed Annuitant
• Reinstatement
• Veterans Employment Opportunity Act (VEOA) of 1998

In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document .

APPLICANTS MUST ALSO MEET THE BASIC EDUCATION REQUIREMENTS IN THE EDUCATION SECTION BELOW AS WELL AS THE EXPERIENCE IN THIS SECTION.

Specialized Experience GS-11: One year of specialized experience which includes: Assists senior level engineers in the preparation of analysis, design and inspections of structures. Creates conceptual versions of contract drawings, as well as preliminary calculations, quantities, and technical specifications. Performs the initial review of project submittals to ensure they are in accordance with the contract plans and specifications. Participates on site inspections during construction, periodic safety assessments and structural evaluations. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09).
OR
Completed a Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to perform the work of the position, such as Civil Enginering, Architect Design and other Engineering related courses of study (Note: You must attach a copy of your transcripts.)
OR
Combination of Education and Experience: To compute the percentage, divide your total months of qualifying experience by 12. Then, divide your semester hours of graduate education beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. The total percentage must equal at least 100 percent to qualify. (Note: You must attach a copy of your transcripts.)

Specialized Experience GS-12 : One year of specialized experience which includes: independently developing designs for structural features of large projects; developing design computations for structures composed of steel and/or reinforced concrete; independently preparing structural engineering documents such as drawings and specifications; performing structural site evaluations and investigations; leading multi-discipline project design teams in the development of plans, specifications, and studies for large or a combination of smaller engineering projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

You will be evaluated on the basis of your level of competency in the following areas:

• Design
• Modeling and Simulation
• Structural Engineering
• Written Communication

Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent:
GS-11- 52 WEEKS AT THE GS 09 LEVEL
GS-12- 52 WEEKS AT THE GS 11 LEVEL Basic Requirement for Civil Engineer (Structural):

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: .