Drafter I
Belcan Corp - Bellingham, WA
Posted: 8/9/2025 - Expires: 11/7/2025
Job ID: 292302591
Job Description
Job Description
Job Title: Drafter I
Location: Ferndale, WA
Zip Code: 98248
Duration: 12 Months
Pay Rate: $40.67/hr.
Keyword's: #Ferndalejobs; #Drafterjobs.
Start Date: Immediate
Job Description:
ESSENTIAL DUTIES & RESPONSIBILITIES
* out P&ID sets from the list provided by process and Process Safety Management (PSM). Go into the field and verify accuracy of piping on drawings, including but not limited to:
* All vents and drains with sizes.
* Verify drawing continuations between sheets.
* Complete information for all equipment specs.
* Check for car seal bands and note numbers for any missing car seal valve (CSV) numbers.
* Verify car sealed valves to be open or shut per information on P&ID.
Note dead legs.
* Check for exposed asbestos, missing bull plugs, pipes off pipe shoes, missing fireproofing, sagging lines, leaks or any maintenance/safety issue noticed in the walkdown.
* Markup P&IDs and correct discrepancies and errors
* a set of check prints and a set of redlines for the process engineer to review for the PHA.
* Make all final corrections and let Document Control know when P&IDs have been updated and are ready to be posted to the document repository.
* Participate in Management of Change (MOC) process by updating P&IDs impacted by changes in the field.
BASIC/REQUIRED SKILLS
* Ability to read and understand P&IDs as well as related drawings (e.g. isometrics and plans)
* Self-motivated and comfortable working independently
* Physically capable of walking long hours and climbing stairs and ladders in the refinery.
* Experience with AutoCAD for P&ID drafting.
* Strong communication skills - both verbal and written - to interact with engineers and unit operators.
* Ability to structure time effectively to meet deadlines and be flexible for occasional supplemental support requests.
PREFERRED SKILLS
* Experience in an engineering or refinery/chemical or other relevant industrial environment.
* Experience with project document control systems.
* An understanding of engineering drawings and equipment documentation
* Knowledge of SAP Document Management System functionality
* Familiarity with safety requirements and equipment in a refinery environment
WORKING ENVIRONMENT/PHYSICAL DEMANDS
* This position requires being out in the refinery for long periods of time:
* Walking, climbing ladders and stairs - Does not include scaffolds or anywhere fall protection is required.
* Working comfortably at heights and climbing towers over 100" tall
* Always adhering to safety requirements including wearing proper PPE: Hard hat, safety glasses, gloves, Fire Resistant Clothing, steel-toed boots and hearing protection.
Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, colour, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.
Belcan is an equal opportunity employer. EOE/M/F/D/V
Job Summary
Veteran Preference
Company Details
Company
Belcan Corp
Industry
Temporary Help Services
Job Information
Location
Bellingham, WA
Job Type
Full Time Employee
Experience
Less than 1 Year
Job Position
1 Position(s) Open
Duration
Over 150 Days
Additional Information
Federal Contractor
Yes
Affirmative Action Plan
No
Belcan Corp - Bellingham, WA
Posted: 8/9/2025 - Expires: 11/7/2025
Job ID: 292302591
Job Description
Job Description
Job Title: Drafter I
Location: Ferndale, WA
Zip Code: 98248
Duration: 12 Months
Pay Rate: $40.67/hr.
Keyword's: #Ferndalejobs; #Drafterjobs.
Start Date: Immediate
Job Description:
ESSENTIAL DUTIES & RESPONSIBILITIES
* out P&ID sets from the list provided by process and Process Safety Management (PSM). Go into the field and verify accuracy of piping on drawings, including but not limited to:
* All vents and drains with sizes.
* Verify drawing continuations between sheets.
* Complete information for all equipment specs.
* Check for car seal bands and note numbers for any missing car seal valve (CSV) numbers.
* Verify car sealed valves to be open or shut per information on P&ID.
Note dead legs.
* Check for exposed asbestos, missing bull plugs, pipes off pipe shoes, missing fireproofing, sagging lines, leaks or any maintenance/safety issue noticed in the walkdown.
* Markup P&IDs and correct discrepancies and errors
* a set of check prints and a set of redlines for the process engineer to review for the PHA.
* Make all final corrections and let Document Control know when P&IDs have been updated and are ready to be posted to the document repository.
* Participate in Management of Change (MOC) process by updating P&IDs impacted by changes in the field.
BASIC/REQUIRED SKILLS
* Ability to read and understand P&IDs as well as related drawings (e.g. isometrics and plans)
* Self-motivated and comfortable working independently
* Physically capable of walking long hours and climbing stairs and ladders in the refinery.
* Experience with AutoCAD for P&ID drafting.
* Strong communication skills - both verbal and written - to interact with engineers and unit operators.
* Ability to structure time effectively to meet deadlines and be flexible for occasional supplemental support requests.
PREFERRED SKILLS
* Experience in an engineering or refinery/chemical or other relevant industrial environment.
* Experience with project document control systems.
* An understanding of engineering drawings and equipment documentation
* Knowledge of SAP Document Management System functionality
* Familiarity with safety requirements and equipment in a refinery environment
WORKING ENVIRONMENT/PHYSICAL DEMANDS
* This position requires being out in the refinery for long periods of time:
* Walking, climbing ladders and stairs - Does not include scaffolds or anywhere fall protection is required.
* Working comfortably at heights and climbing towers over 100" tall
* Always adhering to safety requirements including wearing proper PPE: Hard hat, safety glasses, gloves, Fire Resistant Clothing, steel-toed boots and hearing protection.
Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, colour, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.
Belcan is an equal opportunity employer. EOE/M/F/D/V
Job Summary
Veteran Preference
Company Details
Company
Belcan Corp
Industry
Temporary Help Services
Job Information
Location
Bellingham, WA
Job Type
Full Time Employee
Experience
Less than 1 Year
Job Position
1 Position(s) Open
Duration
Over 150 Days
Additional Information
Federal Contractor
Yes
Affirmative Action Plan
No
Job ID: 488974646
Originally Posted on: 8/11/2025
Want to find more Construction opportunities?
Check out the 164,086 verified Construction jobs on iHireConstruction
Sign Up for Job Alerts
