BIM Modeler 2
Date Posted:
08/15/2025
Location:
PORTLAND, OR
Job Category:
EFS Job Profile
Salary Interval:
Full Time
Pay Range:
$59,000.00 - $79,000.00
Application Instructions
When applying with please include your resume or CV. (References and covered letters are not required but are welcomed.) We would like to thank candidates who submit their interest for this position. Due to the volume of resumes that we receive, only those candidates selected for interviews will be contacted.
EC Electric prides itself on the quality of its employees and as such, candidates who receive a job offer will be required to successfully complete a DMV check, drug screening, and background check. Due to the constant update of state and federal mandates a vaccination requirement or an exemption status may be a condition of employment.
EC Electric is the largest privately held electrical contracting company in the Pacific Northwest. EC specializes in designing and installing medium voltage and low voltage electrical systems in four areas: Construction, Technical Systems, 24/7 Service, and Energy Solutions.
Visions and Values
Integrity- Creating respectful, honorable, principled solutions even in difficult moments.
Safety- Zero injuries, safe work environments.
Quality-Superior craftsmanship.
Equity- Fairness, opportunity and inclusions for every employee.
Fulfillment- Promoting employee empowerment.
Profitability- Planning and efficient execution of quality work.
Position Description
The BIM Modeler 2 is an intermediate level modeling position and is responsible for providing modeling efforts for both project delivery and standards. This is a member of the production team that will create most of the detailed drawings for a project and may function as a Detailer as determined by their supervisor. Knowledge of Autodesk Navis Works, Autodesk Design Review and working knowledge of 3D layout and design.
Duties and Responsibilities include the following:
Perform layout and input of marked-up drawings into Revit in accordance with EC Standards.
Setup of Revit views for use by the EC Project team including electronic document filing and all other facets of the electronic drawings and/or model.
Prepare copies and help make sets of documents for transmittal to other parties.
Download drawings and information from the Web, SharePoint or project websites (FTP, etc.).
Documents and archives work pursuant with the EC standard.
Acknowledgement of any/all EC confidentiality and/or Non-Disclosure requirements pursuant to this position. The protection of Proprietary or Company Intellectual Property.
Ability to create Revit work sets and understanding of Revit work sharing process.
Ability to take verbal and general written direction well and turn that direction into appropriate, working design documents.
Sufficient working knowledge of the most current modeling applications software in use by EC, including being able to manipulate Revit families, views, browser structure, sheets, schedules, filters and similar Revit functions.
Understanding of 3D coordination with other trades. Work closely with EC field supervision to produce dimensioned drawings for layout and pre-fabrication from the model.
Lead EC teams or work with vendors to laser scan existing structures. Coordinate delivery of a 3D object model created from laser scan data.
Participate in job layout driven by 3D model data. Verify elevations and dimensions using computer driven survey and modeling equipment such as Total Station.
Ability to receive and transmit documents on behalf of the design team, either via posting to website or the Internet or via hard copy.
Fluency with all plotters, printers and reproduction systems used in house or on the job site.
Fluency for importing documents, such as spread sheets, photos, images, and word processing files into Revit projects.
Fluency in the current version of Revit software employed by the Department.
Knowledge of Autodesk Navis Works, Autodesk Design Review and working knowledge of 3D layout and design.
Other duties as assigned.
Position Requirements
Experience and skills required:
Proficient with Microsoft Office Suite, 2D and 3D Revit software, Navisworks, AutoCAD and eVolve. .
Bachelor's degree (B. A. / B. S.) from four-year college or university in Construction Engineering
Prior experience with design/build, preferred
Demonstrated ability to read, understand, and write contracts
Strong computer skills - Excel, Word, estimating software (Accubid a plus)
Excellent people, communication and negotiating skill
Compensation and Benefits:
Salary range for this position is $59,000-$79,000 annually.
Opportunity for a discretionary year-end bonus.
401k with a 40% employer match (up to federal limit.)
In addition to significant career growth opportunities, full-time employees enjoy a competitive pay rate, paid holidays and PTO; Medical, Dental, Vision, Life Insurance, Disability Insurance, Flexible Spending Accounts, 401k plan and Employee Assistance Program.
Date Posted:
08/15/2025
Location:
PORTLAND, OR
Job Category:
EFS Job Profile
Salary Interval:
Full Time
Pay Range:
$59,000.00 - $79,000.00
Application Instructions
When applying with please include your resume or CV. (References and covered letters are not required but are welcomed.) We would like to thank candidates who submit their interest for this position. Due to the volume of resumes that we receive, only those candidates selected for interviews will be contacted.
EC Electric prides itself on the quality of its employees and as such, candidates who receive a job offer will be required to successfully complete a DMV check, drug screening, and background check. Due to the constant update of state and federal mandates a vaccination requirement or an exemption status may be a condition of employment.
EC Electric is the largest privately held electrical contracting company in the Pacific Northwest. EC specializes in designing and installing medium voltage and low voltage electrical systems in four areas: Construction, Technical Systems, 24/7 Service, and Energy Solutions.
Visions and Values
Integrity- Creating respectful, honorable, principled solutions even in difficult moments.
Safety- Zero injuries, safe work environments.
Quality-Superior craftsmanship.
Equity- Fairness, opportunity and inclusions for every employee.
Fulfillment- Promoting employee empowerment.
Profitability- Planning and efficient execution of quality work.
Position Description
The BIM Modeler 2 is an intermediate level modeling position and is responsible for providing modeling efforts for both project delivery and standards. This is a member of the production team that will create most of the detailed drawings for a project and may function as a Detailer as determined by their supervisor. Knowledge of Autodesk Navis Works, Autodesk Design Review and working knowledge of 3D layout and design.
Duties and Responsibilities include the following:
Perform layout and input of marked-up drawings into Revit in accordance with EC Standards.
Setup of Revit views for use by the EC Project team including electronic document filing and all other facets of the electronic drawings and/or model.
Prepare copies and help make sets of documents for transmittal to other parties.
Download drawings and information from the Web, SharePoint or project websites (FTP, etc.).
Documents and archives work pursuant with the EC standard.
Acknowledgement of any/all EC confidentiality and/or Non-Disclosure requirements pursuant to this position. The protection of Proprietary or Company Intellectual Property.
Ability to create Revit work sets and understanding of Revit work sharing process.
Ability to take verbal and general written direction well and turn that direction into appropriate, working design documents.
Sufficient working knowledge of the most current modeling applications software in use by EC, including being able to manipulate Revit families, views, browser structure, sheets, schedules, filters and similar Revit functions.
Understanding of 3D coordination with other trades. Work closely with EC field supervision to produce dimensioned drawings for layout and pre-fabrication from the model.
Lead EC teams or work with vendors to laser scan existing structures. Coordinate delivery of a 3D object model created from laser scan data.
Participate in job layout driven by 3D model data. Verify elevations and dimensions using computer driven survey and modeling equipment such as Total Station.
Ability to receive and transmit documents on behalf of the design team, either via posting to website or the Internet or via hard copy.
Fluency with all plotters, printers and reproduction systems used in house or on the job site.
Fluency for importing documents, such as spread sheets, photos, images, and word processing files into Revit projects.
Fluency in the current version of Revit software employed by the Department.
Knowledge of Autodesk Navis Works, Autodesk Design Review and working knowledge of 3D layout and design.
Other duties as assigned.
Position Requirements
Experience and skills required:
Proficient with Microsoft Office Suite, 2D and 3D Revit software, Navisworks, AutoCAD and eVolve. .
Bachelor's degree (B. A. / B. S.) from four-year college or university in Construction Engineering
Prior experience with design/build, preferred
Demonstrated ability to read, understand, and write contracts
Strong computer skills - Excel, Word, estimating software (Accubid a plus)
Excellent people, communication and negotiating skill
Compensation and Benefits:
Salary range for this position is $59,000-$79,000 annually.
Opportunity for a discretionary year-end bonus.
401k with a 40% employer match (up to federal limit.)
In addition to significant career growth opportunities, full-time employees enjoy a competitive pay rate, paid holidays and PTO; Medical, Dental, Vision, Life Insurance, Disability Insurance, Flexible Spending Accounts, 401k plan and Employee Assistance Program.
Job ID: 489794505
Originally Posted on: 8/17/2025
Want to find more Construction opportunities?
Check out the 163,689 verified Construction jobs on iHireConstruction
Similar Jobs
Sign Up for Job Alerts
