Overview
U.S. Electrical Testing specializes in electrical acceptance testing, maintenance testing, and commissioning services for the nations most recognizable mission-critical facilities, secure environments, commercial and industrial clients, and electrical contractors. The companys capabilities include emergency response, engineering services, and turn-key installation and repair.
Responsibilities
+ Programs, installs and maintains protective relaying and metering. Performs electrical tests and repairs concerned with maintenance and performance evaluation of in-service relays to prevent and remedy abnormal behavior or failure of transmission and distribution equipment. Analyzes test results and interprets electrical diagrams to locate defective equipment.
+ Essential responsibilities and activities include but are not limited to:
+ Proficiently uses hand, power tools, meters and other test equipment in energized electrical rooms, vaults, and substations to install, maintain, repair and program protective relays and associated wiring and equipment
+ Applies, reads, understands, reviews and corrects schematic, wiring diagram blueprints and substation drawings and inspections
+ Programs and operates various test equipment and exercises all safe work practices as outlined in the company safety handbook
+ Commissions new relay and metering installations
+ Coordinates testing, troubleshooting and repairs of relaying and other equipment with other department personnel
+ Performs maintenance on and testing of relays and associated equipment such as standby generators and display meters
+ Troubleshoots, repairs and replaces components involved in questionable operations and failures
+ Participates in emergency call outs
+ Performs other duties, tasks and special projects as assigned
Qualifications
+ This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance with our policy.
+ Applicants selected must have minimum 4+ years of relevant electrical experience OR associates degree and 2+ years of relevant electrical experience OR Bachelors degree and 1+ years of relevant electrical experience
+ Possess a valid/active U.S. Work Authorization
**Expectations of Expertise & Knowledge:**
+ NETA / NICET certification (preferred) or equivalent hands-on experience in electrical testing.
+ Strong understanding of ANSI, IEEE, NETA, NFPA, NEC, and OSHA electrical safety standards.
+ Ability to interpret electrical schematics, wiring diagrams, and technical manuals.
+ Proficiency in operating and troubleshooting protective relays, circuit breakers, transformers, switchgear, and other electrical equipment.
+ Experience with test equipment such as Doble, Omicron, Megger, Vanguard, and Fluke meters.
+ Understanding of insulation resistance, power factor, contact resistance, and high-potential (Hi-Pot) testing procedures.
+ Knowledge of medium and high-voltage systems (up to 500kV), including arc flash hazard analysis.
+ Strong troubleshooting and analytical skills with the ability to diagnose system failures.
+ Willingness to travel as needed and work in industrial, data center, and utility environments.
+ Ability to work safely under minimal supervision and follow industry best practices.
+ Perform **acceptance and maintenance testing** of electrical power systems, ensuring compliance with NETA standards
+ Conduct protective relay testing, calibration, and programming for various manufacturers.
+ Perform circuit breaker and switchgear testing, including timing tests, primary and secondary injection testing.
+ Troubleshoot electrical faults and perform root cause analysis for system failures.
+ Conduct transformer testing, including turns ratio, insulation resistance, and power factor testing.
+ Ensure adherence to electrical safety protocols, including lockout/tagout (LOTO) procedures and PPE compliance.
+ Maintain detailed test reports and documentation for compliance and client review.
+ Collaborate with engineers, project managers, and clients to ensure efficient system commissioning and startup.
+ Provide mentorship and technical guidance to junior technicians as needed.
**Desired / Advantageous Qualifications:**
+ OEM certified field service training program.
**We offer an excellent benefits package including:**
+ A competitive salary
+ Medical, dental, vision, life, and disability insurance
+ Paid time off
+ Tuition reimbursement
+ 401k Retirement Plan
+ Military Reserve pay offset
+ Paid maternity leave
**Abilities:**
+ Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.
+ Relocates a 12-foot stepladder without assistance.
+ Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
+ Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
+ Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
+ May use a standard ladder without exceeding the weight limit while carrying tools.
+ Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
+ Apply general rules to specific problems to produce answers that make sense.
+ Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
+ See details at close range (within a few feet of the observer).
+ Listen to and understand information and ideas presented through spoken words and sentences.
U.S. Electrical Testing specializes in electrical acceptance testing, maintenance testing, and commissioning services for the nations most recognizable mission-critical facilities, secure environments, commercial and industrial clients, and electrical contractors. The companys capabilities include emergency response, engineering services, and turn-key installation and repair.
Responsibilities
+ Programs, installs and maintains protective relaying and metering. Performs electrical tests and repairs concerned with maintenance and performance evaluation of in-service relays to prevent and remedy abnormal behavior or failure of transmission and distribution equipment. Analyzes test results and interprets electrical diagrams to locate defective equipment.
+ Essential responsibilities and activities include but are not limited to:
+ Proficiently uses hand, power tools, meters and other test equipment in energized electrical rooms, vaults, and substations to install, maintain, repair and program protective relays and associated wiring and equipment
+ Applies, reads, understands, reviews and corrects schematic, wiring diagram blueprints and substation drawings and inspections
+ Programs and operates various test equipment and exercises all safe work practices as outlined in the company safety handbook
+ Commissions new relay and metering installations
+ Coordinates testing, troubleshooting and repairs of relaying and other equipment with other department personnel
+ Performs maintenance on and testing of relays and associated equipment such as standby generators and display meters
+ Troubleshoots, repairs and replaces components involved in questionable operations and failures
+ Participates in emergency call outs
+ Performs other duties, tasks and special projects as assigned
Qualifications
+ This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance with our policy.
+ Applicants selected must have minimum 4+ years of relevant electrical experience OR associates degree and 2+ years of relevant electrical experience OR Bachelors degree and 1+ years of relevant electrical experience
+ Possess a valid/active U.S. Work Authorization
**Expectations of Expertise & Knowledge:**
+ NETA / NICET certification (preferred) or equivalent hands-on experience in electrical testing.
+ Strong understanding of ANSI, IEEE, NETA, NFPA, NEC, and OSHA electrical safety standards.
+ Ability to interpret electrical schematics, wiring diagrams, and technical manuals.
+ Proficiency in operating and troubleshooting protective relays, circuit breakers, transformers, switchgear, and other electrical equipment.
+ Experience with test equipment such as Doble, Omicron, Megger, Vanguard, and Fluke meters.
+ Understanding of insulation resistance, power factor, contact resistance, and high-potential (Hi-Pot) testing procedures.
+ Knowledge of medium and high-voltage systems (up to 500kV), including arc flash hazard analysis.
+ Strong troubleshooting and analytical skills with the ability to diagnose system failures.
+ Willingness to travel as needed and work in industrial, data center, and utility environments.
+ Ability to work safely under minimal supervision and follow industry best practices.
+ Perform **acceptance and maintenance testing** of electrical power systems, ensuring compliance with NETA standards
+ Conduct protective relay testing, calibration, and programming for various manufacturers.
+ Perform circuit breaker and switchgear testing, including timing tests, primary and secondary injection testing.
+ Troubleshoot electrical faults and perform root cause analysis for system failures.
+ Conduct transformer testing, including turns ratio, insulation resistance, and power factor testing.
+ Ensure adherence to electrical safety protocols, including lockout/tagout (LOTO) procedures and PPE compliance.
+ Maintain detailed test reports and documentation for compliance and client review.
+ Collaborate with engineers, project managers, and clients to ensure efficient system commissioning and startup.
+ Provide mentorship and technical guidance to junior technicians as needed.
**Desired / Advantageous Qualifications:**
+ OEM certified field service training program.
**We offer an excellent benefits package including:**
+ A competitive salary
+ Medical, dental, vision, life, and disability insurance
+ Paid time off
+ Tuition reimbursement
+ 401k Retirement Plan
+ Military Reserve pay offset
+ Paid maternity leave
**Abilities:**
+ Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.
+ Relocates a 12-foot stepladder without assistance.
+ Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
+ Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
+ Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
+ May use a standard ladder without exceeding the weight limit while carrying tools.
+ Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
+ Apply general rules to specific problems to produce answers that make sense.
+ Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
+ See details at close range (within a few feet of the observer).
+ Listen to and understand information and ideas presented through spoken words and sentences.
Job ID: 480381785
Originally Posted on: 6/8/2025
Want to find more Construction opportunities?
Check out the 177,573 verified Construction jobs on iHireConstruction
Similar Jobs
Sign Up for Job Alerts
